= Dyne:bolic Hardware Compatability Page =
I have tested dyne:bolic 1.1.1 on the following hardware, and here's how it fared...

''Note:'' the PCI cards that worked after modprobe may not have been auto-detected because pcimodules dumps core on my test computer :(

== Computers ==
 .
|| Dell Dimension L500cx || Perfect, except for Armagetron which, on five out of 8 "identical" machines, locks the computer solid, leaving a pink pastel random-pixel flashing random image on the screen, and mplayer crashing out. ||
 || Compaq Deskpro 5150 (150 MHz Pentium non-MMX) || No. The system doesn't seem to boot off CDROMs. ||
 || Compaq Deskpro 2000/5200MMX || Perfect, except that mplayer crashes out. ||
 || Compaq Deskpro 2000/5233MMX || Perfect, except that mplayer crashes out. ||
 || Gateway 2000 || 1.0 & 1.1.1 are said to be OK! ||
 || Sony Vaio || 1.0 and 1.1.1 are said to be OK! ||
 || Dell Latitude CPx H500GT || text mode yes, X no (see ATI Rage Mobility below) ||
 || HP pavilion ze5400 || Yes, but limited to 800x600 (not fullscreen), can't see pen drive. ||
 || Dell Inspiron 8600 || (w/ Radeon 9600) Yes, but limited to 800x600 and some windows don't fit on scree due to wide aspect ratio, no audo. ||
 || Dell latitude 700mhz || (No problem fantastic !) with ati 16... ||
 || IBM Netfinity 3500 m10 Dual 500mhz || (No problem fantastic !) with S3 Savage 2000 AGP Video... ||
 || HP pavilion ze4500 || Almost Yes, but troubles with ACPI. At the boot prompt, try acpi=no ||
 || Dell latitude C600 850mhz || Yes works fine and works with Cisco LM 340 card bus wireless card ||
 ||<^>IBM ThinkPad T30||<^>Works just fine for me. No suspend/hibernation powersave mode, but who cares. ||
== Processors ==
 .
|| Intel Pentium MMX 200 & 233 MHz [Compaq Deskpro 2000/5200MMX & 5233MMX] || Yes, but mplayer and pcimodules crash out with illegal instruction. ||
 || Intel Pentium MMX 233 MHz [Compaq Deskpro 2000/5233MMX] || Yes, but mplayer and pcimodules crash out with illegal instruction. ||
 || Intel Pentium II 350Mhz [80523PY350512PE SL2U4 - Philippines] || Yes, but not thoroughly tested (dyne:bolic 1.4.1) ||
 || Intel Celeron (Mendocino) 500 MHz [Dell Dimension L500cx] || Yes, but mplayer crashes out with illegal instruction. ||
 || AMD-K6(tm) 3D processor 400 MHz and 500 MHz || Yes, but mplayer and pcimodules crash out with illegal instruction. ||
 || Intel Pentium III (Coppermine) || Yes! ||
 || AMD XP1900+ Palamino 1600MHz || Yes, no strangeness to report. ||
 || AMD XP2000+ Thoroughbred *MHz || Yes, no strangeness to report. ||
 || AMD XP2500+ Barton 2033MHz/214MHz-FSB || Yes, but not thoroughly tested. (dyne:bolic 1.4.1) ||
 || AMD Athlon 64 2800+ 1800MHz || Yes, no strangeness to report. ||
== Motherboards ==
 .
|| Model || Works? || Comments ||
 || MSI K7NF2 Delta-L Ultra 400 || Yes, but not thoroughly tested || (dyne:bolic 1.4.1) ||
== Memory ==
 .
|| Size || Type || No. of Sticks & Sizes || Controller ||  Comments ||
 || 768MB || DDR/PC3200 || 2 / 512MB + 256MB || Nforce2 Dual Channel Mode || ||
== IDE controllers ==
 .
|| Chip || Works? ||
 || SiS530 || Yes! ||
 || VIA VT82C586B || Yes! ||
 || Intel 82371 PIIX4 || Yes! ||
 || Nvidia Nforce2 ATA || Yes! But not thoroughly tested (dyne:bolic 1.4.1) ||
== USB controllers ==
 .
|| Name || Type || Works? ||
 || Intel 82801AA (Rev 02) (in Dell L500cx) || UHCI || Yes with usb-uhci but Nokia 5510 crashes the machine ||
 || SiS USB 1.0 Controller || OHCI || Don't know - pcimodules gets illegal instruction ||
== On-board video chips ==
 .
|| Name || Chip || Bus || Works? ||
 || S3 Trio 64V2/GX || 86C785 || PCI || Yes! ||
 || Dell Dimension L500cx || i810 || PCI || All except armagetron on 5 out of 8 machines ||
== Video cards ==
 .
|| Name || Chip number || Bus || Works? ||
 || ATI Radeon 9200 SE ||   RV280(?) || PCI || No. When X starts, It blinks and then says it cannot find the device in any video mode. ||
 || ATI Radeon 9600 Pro || || ? || No. As soon as it gets past "Loading initrd..." we just get a black screen ||
 || ATI Radeon 9600 128MB || || AGP || X Works fine here. (specific model unknown) ||
 || ATI Rage Mobility P/M AGP 2x || ? || AGP || No. As soon as it switches to graphic mode, the screen goes black and then fades slowly and plasmagorically to white ||
 || S3 Trio 3D/2X "On Board" || 86C368 || AGP || Yes! ||
 || S3 Trio 64V+ SPIDER BIOS || || PCI || Yes but: 1) Image is offset 1cm to the left and has 1cm black border at bottom.  2) Splash screen tab edges have white and black guy ropes & moving the splash screen right leaves a white blob on the screen at tab left bottom. ||
 || S3 Trio 64V+ Diamond Multimedia || || PCI || As above. Armagetron gives black screen but doesn't crash the computer. ||
 || S3 Trio 32 || 86C732-P || PCI || As above. ||
 || SIS6326 AGP 4MB || SIS6326 || AGP || Yes, but not fully tested (dyne:bolic 1.4.1) ||
 || Tseng Labs ET6000 (BIOS V1.4) || ET6000 || PCI || Yes! (FB) ||
 || Cirrus Logic (CL/Quadtel video BIOS) || CL-GD5343-QC-F || PCI || Well, er.. yes, sort of. Looks like my card has dodgy VRAM. ||
 || Matrox MGA Mystique || MGA-1064SG-H || PCI || Yes! 1024x768! ||
 || 2 the MAX || ARK1000PV || PCI || No.  X doesn't start up. ||
 || Trident || TVGA9000B || ISA-16 || No.  X doesn't start up. ||
 || NVIDIA Geforce 4 MX440 64MB || || || Yes, no strangeness to report. ||
 || NVIDIA FX5200 128MB || || || Yes, no strangeness to report. ||
 || Voodoo 3 || || || Yes, no strangeness to report. ||
 || NVIDIA FX56000 VTDR 128MB (MSI) || - || AGP || Yes, but not thoroughly tested, did not try TV out/in. (dyne:bolic 1.4.1) ||
 || NVIDIA Geforce 5700 Ultra || ||AGP || No. When desktop loads, Monitor cannot synch. (LGP Flatron L1750S) ||
== Display ==
 .
|| Monitor || Works? || Comments ||
 || Compac P700 Trinitron 17" || Yes || 60Hz Refresh Rate shifts screen far to the right (dyne:bolic 1.4.1) ||
== Ethernet cards ==
 .
|| Name || Chip || Bus || Works? ||
 || 3Com Etherlink III PCI 3x590 TPO || || PCI || Yes, after modprobe 3x59x & pump ||
 || 3Com Etherlink XL PCI 3C900-COMBO || || PCI || Yes, after modprobe 3x59x & pump ||
 || 3Com 3C905-TX || || PCI || Yes, after modprobe 3c59x & pump ||
 || 3Com Etherlink III 3x509 || || ISA-16 || Yes, after modprobe 3c509 & pump ||
 || 3Com Etherlink III 3x509-COMBO || || ISA-16 || Yes, after modprobe 3c509 & pump ||
 || 3Com Etherlink III 3x509B || || || ||