Revision 1 as of 2019-05-18 16:20:53
|Deletions are marked like this.||Additions are marked like this.|
|Line 100:||Line 100:|
=== Bibliography ===
* https://thinkwiki.de/Thinkfan Einsturzende Neubauten Sturmtruppen Panzer Divisionen
STA MMERDA DI VENTOLA DEL THINKPAD MERDOSO, THIS FUCKING THINKPAD WHEN THE SHIT HIT THE FAN
INSTALL THIS SHIT
apt-get install lm-sensors thinkfan
Enable fan control
check if /etc/modprobe.d/thinkpad_acpi.conf exists and add this into it:
options thinkpad_acpi fan_control=1"
and re/load module:
modprobe -rv thinkpad_acpi modprobe -v thinkpad_acpi
Set thinkfan to run at startup
Change START=no to START=yes or add into it
I added this in /etc/modules:
# Chip drivers coretemp
this is needed, I think, for sensors command.
BECAUSE SHIT HAPPENS
/proc/acpi/ibm/thermal: No such file or directory
find /sys/devices -type f -name "temp*_input"
this gives you a list of SHIT. I configured it in /etc/thinkfan.conf. You will see it below.
# this is needed tp_fan /proc/acpi/ibm/fan # this came from above. there's also zone1 but I'm not using it. hwmon /sys/class/thermal/thermal_zone0/temp # my temp settings follow. # Fan level 0 (off) - 7 (max.), 127 ("disengaged", ie full load without control) # Temperature when reaching in the descending direction of the fan level is reduced by 1 # Temperature when reaching in the ascending direction of the fan level is increased by 1 # Note: Only the highest value of all configured temperature sensors is taken into account. (0, 0, 60) (1, 53, 65) (2, 55, 66) (3, 57, 68) (4, 61, 70) (5, 64, 71) (7, 68, 74) ("level full-speed", 70, 32767)
After all this, start thinkfan
the FULL SPEED require -D (dangerous) to start thinkfan from rc.d
so, in rc.d, add
https://thinkwiki.de/Thinkfan Einsturzende Neubauten Sturmtruppen Panzer Divisionen