Differences between revisions 24 and 49 (spanning 25 versions)
Revision 24 as of 2019-10-03 15:59:06
Size: 13993
Editor: asbesto
Comment:
Revision 49 as of 2020-02-12 11:42:25
Size: 29278
Editor: asbesto
Comment:
Deletions are marked like this. Additions are marked like this.
Line 7: Line 7:
== QUALE simh ==

last version from git!

{{{
apt install git gcc make libpcap-dev libsdl2-dev
git clone https://github.com/simh/simh.git
cd simh
make vax
}}}

make quel che ti serve ovviamente

== DECNET BRIDGE ==

deve stare su una macchina DIVERSA da dove gira il simh. gli serve una eth tutta sua non condivisa col vax emulato.

Sta su corazzini, bella li'

 * http://decnet.ipv7.net/soft-en.html

[[attachment:decnet-bridge_0.9-3.tar.gz]]

== Password reset di un sistema ==


by Zappolo

{{{
avviare simh
./vax
sim> boot
al prompt >>>
dare i seguenti comandi

B /R5:1 DUA0
SET/STARTUP OPA0:
SET WINDOW_SYSTEM 0
SET WRITESYSPARAMS 0
CONTINUE

SPAWN
@SYS$SYSTEM:STARTUP
SET DEFAULT SYS$SYSTEM:
RUN SYS$SYSTEM:AUTHORIZE
MODIFY SYSTEM /PASSWORD=newpassword
}}}

== problemi di SNORRY ==

L'immagine DD ha delle inconsistenze.

Confrontata con l'immagine storica del disco fisico, ho trovato dove questa FINISCE all'interno del dump della scheda da 2GB del disco emulato. Dopo di esso ci sono solo ZERI e poi merda linux rimasta dentro la scheda...

Quindi ho fatto

{{{

  dd if=snorry.img of=fisico.img bs=512 count=2070235

}}}

e l'ho fatto partire in emulazione su wopr. da li' ho dato ana/disk

{{{

Asbesto Molesto, [30.01.20 12:00]
SNORRY::SYSTEM$ ana / disk dua0:
Analyze/Disk_Structure for _SNORRY$DUA0: started on 30-JAN-2020 12:00:08.09

%ANALDISK-W-CHKSCB, invalid storage control block, RVN 1
SNORRY::SYSTEM$

Asbesto Molesto, [30.01.20 12:02]
Disk SNORRY$DUA0:, device type RA92, is online, mounted, file-oriented device,
    shareable, available to cluster, error logging is enabled.

    Error count 0 Operations completed 5430
    Owner process "" Owner UIC [SYSTEM]
    Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G:R,W
    Reference count 91 Default buffer size 512
    Total blocks 2070235 Sectors per track 73
    Total cylinders 2182 Tracks per cylinder 13

    Volume label "SNORRYSYS" Relative volume number 0
    Cluster size 9 Transaction count 189
    Free blocks 1233315 Maximum files allowed 103511
    Extend quantity 5 Mount count 1
    Mount status System Cache name "_SNORRY$DUA0:XQPCACHE"
    Extent cache size 64 Maximum blocks in extent cache 123331
    File ID cache size 64 Blocks currently in extent cache 0
    Quota cache size 240 Maximum buffers in FCP cache 548
    Volume owner UIC [1,1] Vol Prot S:RWCD,O:RWCD,G:RWCD,W:RWCD

  Volume Status: ODS-2, subject to mount verification, protected subsystems
      enabled, file high-water marking, write-through caching enabled.

Asbesto Molesto, [30.01.20 12:05]
immagine da 2GB:

Asbesto Molesto, [30.01.20 12:05]
SNORRY::SYSTEM$ ana /disk dua0:
Analyze/Disk_Structure for _SNORRY$DUA0: started on 30-JAN-2020 12:05:27.66

%ANALDISK-I-SHORTBITMAP, storage bitmap on RVN 1 does not cover the entire devic
e
SNORRY::SYSTEM$

Asbesto Molesto, [30.01.20 12:05]
Disk SNORRY$DUA0:, device type RA92, is online, mounted, file-oriented device,
    shareable, available to cluster, error logging is enabled.

    Error count 0 Operations completed 5418
    Owner process "" Owner UIC [SYSTEM]
    Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G:R,W
    Reference count 91 Default buffer size 512
    Total blocks 3887112 Sectors per track 73
    Total cylinders 4097 Tracks per cylinder 13

    Volume label "SNORRYSYS" Relative volume number 0
    Cluster size 9 Transaction count 189
    Free blocks 1233315 Maximum files allowed 103511
    Extend quantity 5 Mount count 1
    Mount status System Cache name "_SNORRY$DUA0:XQPCACHE"
    Extent cache size 64 Maximum blocks in extent cache 123331
    File ID cache size 64 Blocks currently in extent cache 0
    Quota cache size 240 Maximum buffers in FCP cache 548
    Volume owner UIC [1,1] Vol Prot S:RWCD,O:RWCD,G:RWCD,W:RWCD

  Volume Status: ODS-2, subject to mount verification, protected subsystems
      enabled, file high-water marking, write-through caching enabled.

SNORRY::SYSTEM$

Asbesto Molesto, [30.01.20 12:06]
immagine di snorry trimmata alla dimensione fisica:

Asbesto Molesto, [30.01.20 12:06]
Default buffer size 512
    Total blocks 2070235 Sectors per track 73
    Total cylinders 2182 Tracks per cylinder 13

Asbesto Molesto, [30.01.20 12:06]
immagine di snorry 2GB:

Asbesto Molesto, [30.01.20 12:06]
Default buffer size 512
    Total blocks 3887112 Sectors per track 73
    Total cylinders 4097 Tracks per cylinder 13

Asbesto Molesto, [30.01.20 12:07]
non e' che il FS e' stato espanso

Asbesto Molesto, [30.01.20 12:07]
e' che vede il device per quanto e' grosso

Asbesto Molesto, [30.01.20 12:07]
@gerriunderscore @Mancausoft

Asbesto Molesto, [30.01.20 12:07]
e l'errore di ana/disk e' DIVERSO tra i due

Asbesto Molesto, [30.01.20 12:07]
l'immagine precisa del disco trimmata giusta dice

Asbesto Molesto, [30.01.20 12:07]
%ANALDISK-W-CHKSCB, invalid storage control block, RVN 1
SNORRY::SYSTEM$

Asbesto Molesto, [30.01.20 12:08]
mentre l'immagine disco da 2GB dice

Asbesto Molesto, [30.01.20 12:08]
%ANALDISK-I-SHORTBITMAP, storage bitmap on RVN 1 does not cover the entire devic
e
SNORRY::SYSTEM$

Asbesto Molesto, [30.01.20 12:08]
che e' ben diverso

}}}

un ana/disk/repair ripara il fs trimmato correttamente...

Un successivo BACKUP /IMAGE ha copiato ogni file senza problemi

ho creato altri 2 devices

dua0 boot, dua1 copia di boot trimmata e ana/disk/repair-ata, dua2 idem

ho formattato dua2, initialize

l'ho montata FOREIGN

e ho dato backup /image da dua2 a dua3

{{{

SNORRY::SYSTEM$ mount /foreign dua2:
%MOUNT-I-MOUNTED, SNORRYNEW mounted on _SNORRY$DUA2:
SNORRY::SYSTEM$ backup /image dua1: dua2:
%BACKUP-I-NOBACKUP, DUA1:[SYS0.SYSEXE]ERRORLOG.DMP;1 data not copied, file marke
d NOBACKUP
%BACKUP-I-NOBACKUP, DUA1:[SYS0.SYSEXE]PAGEFILE.SYS;1 data not copied, file marke
d NOBACKUP
%BACKUP-I-NOBACKUP, DUA1:[SYS0.SYSEXE]SWAPFILE.SYS;1 data not copied, file marke
d NOBACKUP
%BACKUP-I-NOBACKUP, DUA1:[SYS0.SYSEXE]SYSDUMP.DMP;1 data not copied, file marked
 NOBACKUP

}}}

ha copiato tutto

pero' dua3 da:

{{{

Asbesto Molesto, [30.01.20 13:59]
il disco backuppato da' cio':

Asbesto Molesto, [30.01.20 13:59]
SNORRY::SYSTEM$ ana /disk
_Device: dua0:
Analyze/Disk_Structure for _SNORRY$DUA0: started on 30-JAN-2020 13:58:44.96

%ANALDISK-W-CHKSCB, invalid storage control block, RVN 1
%ANALDISK-I-BADHIGHWATER, file (1423,2,1) ERRORLOG.DMP;1
  inconsistent highwater mark and EFBLK
%ANALDISK-W-ALLOCCLR, blocks incorrectly marked allocated
  LBN 1126638 to 1126646, RVN 1
%ANALDISK-W-INCQUOTA, QUOTA.SYS indicates 627067 blocks used,
  actual use is 627057 blocks for [SYSTEM]
%ANALDISK-W-FREESPADRIFT, free block count of 1232973 is incorrect (RVN 1);
  the correct value is 1232982
SNORRY::SYSTEM$

}}}

Alla fine, secondo me:

{{{

Asbesto Molesto, [30.01.20 12:37]
allora. 2GB.

Asbesto Molesto, [30.01.20 12:37]
la mia ipotesi e':

Asbesto Molesto, [30.01.20 12:37]
il sistema ha girato con l'immagine da 2GB, e tempo fa fu pure fatto un ana/disk/repair, me lo ricordo

Asbesto Molesto, [30.01.20 12:37]
quindi ha CAPITO che il disco e' da 2GB

Mancausoft, [30.01.20 12:37]
si esatto

Asbesto Molesto, [30.01.20 12:37]
MA il fs e' rimasto da 1.05 gb (rvn invalid storage block)

Katolaz, [30.01.20 12:37]
710 messaggi

Mancausoft, [30.01.20 12:37]
[In reply to Asbesto Molesto]
non e' detto

Asbesto Molesto, [30.01.20 12:37]
ora se lo resizi

Asbesto Molesto, [30.01.20 12:37]
si vede il disco ristretto e da' errore

Katolaz, [30.01.20 12:37]
che minchia siete PAZZI?

Mancausoft, [30.01.20 12:37]
[In reply to Asbesto Molesto]
io non ho sto errore

Asbesto Molesto, [30.01.20 12:37]
quindi ti dice quella cosa

Katolaz, [30.01.20 12:37]
che cazzo e' successo?

Katolaz, [30.01.20 12:38]
MORTO MEDIALAB?

Mancausoft, [30.01.20 12:38]
perche' io uso i parametri giusti a simh

Asbesto Molesto, [30.01.20 12:38]
MA se metti il fs alla dimensione fisica del disco

Mancausoft, [30.01.20 12:38]
se metti parametri a cazzo in simh hai quell'errore

Katolaz, [30.01.20 12:38]
CROLLATO IL VATICANO?

Asbesto Molesto, [30.01.20 12:38]
improvvisamente gli coincide tutto tranne RVS 1

Asbesto Molesto, [30.01.20 12:38]
allora, un colpo di ana/disk/rep

Asbesto Molesto, [30.01.20 12:38]
e si sistema

Mancausoft, [30.01.20 12:38]
se metti il parametro giusto a simh non hai quell'errore

Mancausoft, [30.01.20 12:38]
[In reply to Asbesto Molesto]
no

Asbesto Molesto, [30.01.20 12:38]
IMHO si

Asbesto Molesto, [30.01.20 12:38]
zero errori su ana/disk per me e' RISOLUTIVO
}}}

== edit dei files ==

intanto usa vmsterm (in fondo a questo doc) per connetterti. usa xterm!

poi,

{{{

edit /edt nomefile

all'asterisco, scrivi CHANGE

editi visualmente!

quando hai finito, ctrl-z

torna all'asterisco, scrivi exit, e lui salva.

Se premi "Home" ti apre search! Scrivi il testo da cercare, premi nuovamente home e va sul testo trovato!

NOTA: SU VMSTERM/XTERM, IL CUT'N PASTE DA MOUSE FUNZIONA COL TASTO CENTRALE SUL MIO THINKPAD.

}}}

== recall dei comandi / history ==

recall /all

== Dove stanno i files ==

alias cagate e definizioni stanno dentro

{{{
SYS$SYSCOMMON:[SYSMGR]SYLOGIN.COM
}}}



cercare:

{{{
SNORRY::SYSTEM$ set def [000000]
SNORRY::SYSTEM$ dir [...]games*;*

$ DIR [.mydirectory...]my*file.spec*;*

would find any file beginning with MY followed by any sequence, ending
its name with FILE, and with its type specification beginning with
SPEC in MYDIRECTORY and all the tree down inside.

$ DIR $Disk:[user...]myfile.typ;4

would search for 4th version of MYFILE.TYP in all the USER's directory
tree.

$ DIR $Disk:[user.*...]myfile.typ

would look inside all subdirectories AND their subtrees in USER.

        Furthermore, since this feature is one of DIRECTORY SPECIFICATION
and no of DIR, you can use it for any program that allows ambiguous file
specification (e.g.):

$ SEARCH [...]*.*;* MY_SEARCH_SEQUENCE

would search in all the files contained in the directory tree that hangs
from the current directory for "my_search_sequence" and report all the
files that contain it.

}}}

Login banner e welcome:

dentro SYS$SYSROOT:[SYSMGR] ci sono ANNOUNCE.TXT e WELCOME.TXT


{{{
Snorry:

stanno in dua0:[games]

dua0:[GAMES.STARTREK]STARTREK.EXE

startrek.com deve avere i path giusti all'interno (dua0: nell'emulatore)


Glorry:

dua0:[games]

molti eseguibili .com puntano a dka200: che era di glorry, va settato a dua0:


}}}
Line 11: Line 430:
load -r /usr/local/vax/data/ka655x.bin
attach nvr /usr/local/vax/data/nvram.bin
set log ./glorry.log
load -r ./ka655.bin
attach nvr ./nvram.bin
Line 16: Line 436:
Line 18: Line 437:
attach rq0 glorry.img attach rq0 ./glorry.img

; disable unused stuff
; rl01/02
Line 21: Line 442:
; magtape
Line 22: Line 444:

set xq mac=08-00-2B-CA-CC-AA
attach xq eth0
; floppy lo abilito
set ry disable

; deqna is faster!
SET XQ TYPE=DEQNA
set xq mac=08-00-2B-0C-AC-CA
attach xq eth2

; create a tape device, you never know
set tq enable
set tq tk70
att tq0 mua0.tape

; se attivi questo, perdi lo schermo qua sotto screen
; set console telnet=17100

set cpu conhalt
dep bdr 0
Line 27: Line 463:
exit

Line 31: Line 470:
Line 34: Line 472:
'''launch vax from root user''' and at the simh prompt, write '''launch vax from root user'''

With the above setup, vax will boot automagically. If you need to tweak and boot manually, simply write
Line 40: Line 480:
at the simh prompt.
Line 42: Line 484:
== ethernet holocaust ==

vax.ini ha settato "eth0". su corazzini parte da eth3 PERCHE' UDEV MERDA PORCODIO.

ma eth0 viene visto su eth3, che ha l'ip di corazzini.

ora se tiri su anche eth4 ed eth5, puoi avere altri vax.ini su eth1 ed eth2.

HAI CAPITO PORCODIO?

== problemino con mmm.exe ===

Sto gioco ha bisogno di una patch:

{{{

> suspend



ENTER FILENAME TO STORE IT UNDER (0 TO ABORT REQUEST)



?a.sav



YOUR CURRENT SITUATION IS SAVED AND WILL BE GOOD FOR ANY REVISION 16

YOU CAN NOW QUIT OR CONTINUE. ENTER RESTORE, AT ANY TIME, TO LOAD THE

SITUATION YOU SUSPENDED



WHEN YOU ARE FINISHED, PURGE THE FILE.

           

> restore



ENTER FILENAME IT WAS SUSPENDED UNDER (0 TO ABORT REQUEST)



?a.sav

%FOR-F-INPSTAREQ, input statement requires too much data

  unit 55 file SYS_USERS:[LUTHER]A.SAV;1

  user PC 0002278B


SNORRY::LUTHER$


Non e' grave, visto che il gioco al massimo dura 450 mosse,
ma e' una cosa abbastanza antipatica.

Si aggiusta facilmente cambiando un byte con patch:
$ patch mmm.exe
PATCH>depo/long
LOC>0002278B
NEW>5901043D
NEW>exit
old: 0002278B: 5901283D
new: 0002278B: 5901043D
PATCH>update
%PATCH-I-WRTFIL, updantig image file DUA1:[GIASSI]MMM.EXE;2
Non mi ricordo di aver avuto questo problema quando ci ho giocato
30 e passa anni fa, ma e' possibile che non sapessi nemmeno
che il comando per salvare fosse 'suspend'.

}}}

da una mail di Sandro Giassi

Line 81: Line 605:

'''ATTENZIONE

Il file delle licenze che ti mandano oggi e' pieno di CR / LF ad minchiam. VA CONVERTITO CON dos2unix prima di caricarlo sul vax altrimenti da' un mare di errori.'''
 
Line 259: Line 788:
POI va fatto questo:

{{{

$! RPT 23-MAR-2019
$
$ ON ERROR THEN GOTO END_LOOP
$ ON CONTROL_Y THEN GOTO END_LOOP
$
$ IF F$SEARCH("POST_DECNET_SETUP.TMP;*") .NES. "" THEN -
      DELETE/NOLOG POST_DECNET_SETUP.TMP;*
$
$ MCR NCP SHOW KNOWN LINES TO POST_DECNET_SETUP.TMP
$ OPEN/READ LINE_LIST POST_DECNET_SETUP.TMP
$
$LOOP:
$ READ/END=END_LOOP LINE_LIST LINE_ENTRY
$
$ LINE_ITEM = F$EDIT(LINE_ENTRY,"TRIM,COMPRESS")
$ LINE_ITEM = F$ELEMENT(0," ",LINE_ITEM)
$
$ IF (LINE_ITEM .EQS. "") .OR. -
       (LINE_ITEM .EQS. "Known") .OR. -
       (LINE_ITEM .EQS. "Line") THEN GOTO LOOP
$
$ WRITE SYS$OUTPUT "Line/Circuit ",LINE_ITEM
$
$ MCR NCP SET CIRCUIT 'LINE_ITEM' STATE OFF
$ MCR NCP SET LINE 'LINE_ITEM' STATE OFF
$
$ MCR NCP SET LINE 'LINE_ITEM' BUFFER SIZE 1456
$ MCR NCP DEFINE LINE 'LINE_ITEM' BUFFER SIZE 1456
$ MCR NCP SET CIRCUIT 'LINE_ITEM' HELLO TIMER 90
$ MCR NCP DEFINE CIRCUIT 'LINE_ITEM' HELLO TIMER 90
$
$ MCR NCP SET LINE 'LINE_ITEM' STATE ON
$ MCR NCP SET CIRCUIT 'LINE_ITEM' STATE ON
$
$ GOTO LOOP
$
$END_LOOP:
$ CLOSE LINE_LIST
$ IF F$SEARCH("POST_DECNET_SETUP.TMP;*") .NES. "" THEN -
      DELETE/NOLOG POST_DECNET_SETUP.TMP;*
$
$ EXIT

}}}
Line 348: Line 924:
        echo " -port portnum"
Line 355: Line 932:
        echo " Example: \"vmsterm -host earth portnum\""         echo " Example: \"vmsterm -host earth -port portnum\""
Line 371: Line 948:
FONT=9x15 FONT=10x20
Line 473: Line 1050:
o -e telnet $HOST $PORT
}}}


----
         -e telnet $HOST $PORT
}}}


== Links ==

 * https://en.wikipedia.org/wiki/Clara_Petacci
 * https://github.com/jpetazzo

Appunti VAX VMS

QUALE simh

last version from git!

apt install git gcc make libpcap-dev libsdl2-dev
git clone https://github.com/simh/simh.git
cd simh
make vax

make quel che ti serve ovviamente

DECNET BRIDGE

deve stare su una macchina DIVERSA da dove gira il simh. gli serve una eth tutta sua non condivisa col vax emulato.

Sta su corazzini, bella li'

decnet-bridge_0.9-3.tar.gz

Password reset di un sistema

by Zappolo

avviare simh
./vax
sim> boot
al prompt >>>
dare i seguenti comandi

B /R5:1 DUA0
SET/STARTUP OPA0:
SET WINDOW_SYSTEM 0
SET WRITESYSPARAMS 0
CONTINUE

SPAWN
@SYS$SYSTEM:STARTUP
SET DEFAULT SYS$SYSTEM:
RUN SYS$SYSTEM:AUTHORIZE
MODIFY SYSTEM /PASSWORD=newpassword

problemi di SNORRY

L'immagine DD ha delle inconsistenze.

Confrontata con l'immagine storica del disco fisico, ho trovato dove questa FINISCE all'interno del dump della scheda da 2GB del disco emulato. Dopo di esso ci sono solo ZERI e poi merda linux rimasta dentro la scheda...

Quindi ho fatto

  dd if=snorry.img of=fisico.img bs=512 count=2070235

e l'ho fatto partire in emulazione su wopr. da li' ho dato ana/disk

Asbesto Molesto, [30.01.20 12:00]
SNORRY::SYSTEM$ ana / disk dua0:
Analyze/Disk_Structure for _SNORRY$DUA0: started on 30-JAN-2020 12:00:08.09

%ANALDISK-W-CHKSCB, invalid storage control block, RVN 1
SNORRY::SYSTEM$

Asbesto Molesto, [30.01.20 12:02]
Disk SNORRY$DUA0:, device type RA92, is online, mounted, file-oriented device,
    shareable, available to cluster, error logging is enabled.

    Error count                    0    Operations completed               5430
    Owner process                 ""    Owner UIC                      [SYSTEM]
    Owner process ID        00000000    Dev Prot            S:RWPL,O:RWPL,G:R,W
    Reference count               91    Default buffer size                 512
    Total blocks             2070235    Sectors per track                    73
    Total cylinders             2182    Tracks per cylinder                  13

    Volume label         "SNORRYSYS"    Relative volume number                0
    Cluster size                   9    Transaction count                   189
    Free blocks              1233315    Maximum files allowed            103511
    Extend quantity                5    Mount count                           1
    Mount status              System    Cache name      "_SNORRY$DUA0:XQPCACHE"
    Extent cache size             64    Maximum blocks in extent cache   123331
    File ID cache size            64    Blocks currently in extent cache      0
    Quota cache size             240    Maximum buffers in FCP cache        548
    Volume owner UIC           [1,1]    Vol Prot    S:RWCD,O:RWCD,G:RWCD,W:RWCD

  Volume Status:  ODS-2, subject to mount verification, protected subsystems
      enabled, file high-water marking, write-through caching enabled.

Asbesto Molesto, [30.01.20 12:05]
immagine da 2GB:

Asbesto Molesto, [30.01.20 12:05]
SNORRY::SYSTEM$ ana /disk dua0:
Analyze/Disk_Structure for _SNORRY$DUA0: started on 30-JAN-2020 12:05:27.66

%ANALDISK-I-SHORTBITMAP, storage bitmap on RVN 1 does not cover the entire devic
e
SNORRY::SYSTEM$

Asbesto Molesto, [30.01.20 12:05]
Disk SNORRY$DUA0:, device type RA92, is online, mounted, file-oriented device,
    shareable, available to cluster, error logging is enabled.

    Error count                    0    Operations completed               5418
    Owner process                 ""    Owner UIC                      [SYSTEM]
    Owner process ID        00000000    Dev Prot            S:RWPL,O:RWPL,G:R,W
    Reference count               91    Default buffer size                 512
    Total blocks             3887112    Sectors per track                    73
    Total cylinders             4097    Tracks per cylinder                  13

    Volume label         "SNORRYSYS"    Relative volume number                0
    Cluster size                   9    Transaction count                   189
    Free blocks              1233315    Maximum files allowed            103511
    Extend quantity                5    Mount count                           1
    Mount status              System    Cache name      "_SNORRY$DUA0:XQPCACHE"
    Extent cache size             64    Maximum blocks in extent cache   123331
    File ID cache size            64    Blocks currently in extent cache      0
    Quota cache size             240    Maximum buffers in FCP cache        548
    Volume owner UIC           [1,1]    Vol Prot    S:RWCD,O:RWCD,G:RWCD,W:RWCD

  Volume Status:  ODS-2, subject to mount verification, protected subsystems
      enabled, file high-water marking, write-through caching enabled.

SNORRY::SYSTEM$

Asbesto Molesto, [30.01.20 12:06]
immagine di snorry trimmata alla dimensione fisica:

Asbesto Molesto, [30.01.20 12:06]
Default buffer size                 512
    Total blocks             2070235    Sectors per track                    73
    Total cylinders             2182    Tracks per cylinder                  13

Asbesto Molesto, [30.01.20 12:06]
immagine di snorry 2GB:

Asbesto Molesto, [30.01.20 12:06]
Default buffer size                 512
    Total blocks             3887112    Sectors per track                    73
    Total cylinders             4097    Tracks per cylinder                  13

Asbesto Molesto, [30.01.20 12:07]
non e' che il FS e' stato espanso

Asbesto Molesto, [30.01.20 12:07]
e' che vede il device per quanto e' grosso

Asbesto Molesto, [30.01.20 12:07]
@gerriunderscore @Mancausoft

Asbesto Molesto, [30.01.20 12:07]
e l'errore di ana/disk e' DIVERSO tra i due

Asbesto Molesto, [30.01.20 12:07]
l'immagine precisa del disco trimmata giusta dice

Asbesto Molesto, [30.01.20 12:07]
%ANALDISK-W-CHKSCB, invalid storage control block, RVN 1
SNORRY::SYSTEM$

Asbesto Molesto, [30.01.20 12:08]
mentre l'immagine disco da 2GB dice

Asbesto Molesto, [30.01.20 12:08]
%ANALDISK-I-SHORTBITMAP, storage bitmap on RVN 1 does not cover the entire devic
e
SNORRY::SYSTEM$

Asbesto Molesto, [30.01.20 12:08]
che e' ben diverso

un ana/disk/repair ripara il fs trimmato correttamente...

Un successivo BACKUP /IMAGE ha copiato ogni file senza problemi

ho creato altri 2 devices

dua0 boot, dua1 copia di boot trimmata e ana/disk/repair-ata, dua2 idem

ho formattato dua2, initialize

l'ho montata FOREIGN

e ho dato backup /image da dua2 a dua3

SNORRY::SYSTEM$ mount /foreign dua2:
%MOUNT-I-MOUNTED, SNORRYNEW mounted on _SNORRY$DUA2:
SNORRY::SYSTEM$ backup /image dua1: dua2:
%BACKUP-I-NOBACKUP, DUA1:[SYS0.SYSEXE]ERRORLOG.DMP;1 data not copied, file marke
d NOBACKUP
%BACKUP-I-NOBACKUP, DUA1:[SYS0.SYSEXE]PAGEFILE.SYS;1 data not copied, file marke
d NOBACKUP
%BACKUP-I-NOBACKUP, DUA1:[SYS0.SYSEXE]SWAPFILE.SYS;1 data not copied, file marke
d NOBACKUP
%BACKUP-I-NOBACKUP, DUA1:[SYS0.SYSEXE]SYSDUMP.DMP;1 data not copied, file marked
 NOBACKUP

ha copiato tutto

pero' dua3 da:

Asbesto Molesto, [30.01.20 13:59]
il disco backuppato da' cio':

Asbesto Molesto, [30.01.20 13:59]
SNORRY::SYSTEM$ ana /disk
_Device: dua0:
Analyze/Disk_Structure for _SNORRY$DUA0: started on 30-JAN-2020 13:58:44.96

%ANALDISK-W-CHKSCB, invalid storage control block, RVN 1
%ANALDISK-I-BADHIGHWATER, file (1423,2,1) ERRORLOG.DMP;1
  inconsistent highwater mark and EFBLK
%ANALDISK-W-ALLOCCLR, blocks incorrectly marked allocated
  LBN 1126638 to 1126646, RVN 1
%ANALDISK-W-INCQUOTA, QUOTA.SYS indicates 627067 blocks used,
  actual use is 627057 blocks for [SYSTEM]
%ANALDISK-W-FREESPADRIFT, free block count of 1232973 is incorrect (RVN 1);
  the correct value is 1232982
SNORRY::SYSTEM$

Alla fine, secondo me:

Asbesto Molesto, [30.01.20 12:37]
allora. 2GB.

Asbesto Molesto, [30.01.20 12:37]
la mia ipotesi e':

Asbesto Molesto, [30.01.20 12:37]
il sistema ha girato con l'immagine da 2GB, e tempo fa fu pure fatto un ana/disk/repair, me lo ricordo

Asbesto Molesto, [30.01.20 12:37]
quindi ha CAPITO che il disco e' da 2GB

Mancausoft, [30.01.20 12:37]
si esatto

Asbesto Molesto, [30.01.20 12:37]
MA il fs e' rimasto da 1.05 gb (rvn invalid storage block)

Katolaz, [30.01.20 12:37]
710 messaggi

Mancausoft, [30.01.20 12:37]
[In reply to Asbesto Molesto]
non e' detto

Asbesto Molesto, [30.01.20 12:37]
ora se lo resizi

Asbesto Molesto, [30.01.20 12:37]
si vede il disco ristretto e da' errore

Katolaz, [30.01.20 12:37]
che minchia siete PAZZI?

Mancausoft, [30.01.20 12:37]
[In reply to Asbesto Molesto]
io non ho sto errore

Asbesto Molesto, [30.01.20 12:37]
quindi ti dice quella cosa

Katolaz, [30.01.20 12:37]
che cazzo e' successo?

Katolaz, [30.01.20 12:38]
MORTO MEDIALAB?

Mancausoft, [30.01.20 12:38]
perche' io uso i parametri giusti a simh

Asbesto Molesto, [30.01.20 12:38]
MA se metti il fs alla dimensione fisica del disco

Mancausoft, [30.01.20 12:38]
se metti parametri a cazzo in simh hai quell'errore

Katolaz, [30.01.20 12:38]
CROLLATO IL VATICANO?

Asbesto Molesto, [30.01.20 12:38]
improvvisamente gli coincide tutto tranne RVS 1

Asbesto Molesto, [30.01.20 12:38]
allora, un colpo di ana/disk/rep

Asbesto Molesto, [30.01.20 12:38]
e si sistema

Mancausoft, [30.01.20 12:38]
se metti il parametro giusto a simh non hai quell'errore

Mancausoft, [30.01.20 12:38]
[In reply to Asbesto Molesto]
no

Asbesto Molesto, [30.01.20 12:38]
IMHO si

Asbesto Molesto, [30.01.20 12:38]
zero errori su ana/disk per me e' RISOLUTIVO

edit dei files

intanto usa vmsterm (in fondo a questo doc) per connetterti. usa xterm!

poi,

edit /edt nomefile

all'asterisco, scrivi CHANGE

editi visualmente!

quando hai finito, ctrl-z

torna all'asterisco, scrivi exit, e lui salva.

Se premi "Home" ti apre search! Scrivi il testo da cercare, premi nuovamente home e va sul testo trovato!

NOTA: SU VMSTERM/XTERM, IL CUT'N PASTE DA MOUSE FUNZIONA COL TASTO CENTRALE SUL MIO THINKPAD.

recall dei comandi / history

recall /all

Dove stanno i files

alias cagate e definizioni stanno dentro

SYS$SYSCOMMON:[SYSMGR]SYLOGIN.COM 

cercare:

SNORRY::SYSTEM$ set def [000000]
SNORRY::SYSTEM$ dir [...]games*;*

$ DIR [.mydirectory...]my*file.spec*;*

would find any file beginning with MY followed by any sequence, ending
its name with FILE, and with its type specification beginning with
SPEC in MYDIRECTORY and all the tree down inside.

$ DIR $Disk:[user...]myfile.typ;4

would search for 4th version of MYFILE.TYP in all the USER's directory
tree.

$ DIR $Disk:[user.*...]myfile.typ

would look inside all subdirectories AND their subtrees in USER.

        Furthermore, since this feature is one of DIRECTORY SPECIFICATION
and no of DIR, you can use it for any program that allows ambiguous file
specification (e.g.):

$ SEARCH [...]*.*;* MY_SEARCH_SEQUENCE

would search in all the files contained in the directory tree that hangs
from the current directory for "my_search_sequence" and report all the
files that contain it.

Login banner e welcome:

dentro SYS$SYSROOT:[SYSMGR] ci sono ANNOUNCE.TXT e WELCOME.TXT

Snorry: 

stanno in dua0:[games]

dua0:[GAMES.STARTREK]STARTREK.EXE

startrek.com deve avere i path giusti all'interno (dua0: nell'emulatore)


Glorry:

dua0:[games]

molti eseguibili .com puntano a dka200: che era di glorry, va settato a dua0: 

vax.ini dell'emulatore simh glorry

set log ./glorry.log
load -r ./ka655.bin
attach nvr ./nvram.bin

set cpu 64m
set cpu idle
set rq0 ra92
attach rq0 ./glorry.img

; disable unused stuff
; rl01/02
set rl disable
; magtape
set ts disable
; floppy lo abilito
set ry disable

; deqna is faster!
SET XQ TYPE=DEQNA
set xq mac=08-00-2B-0C-AC-CA
attach xq eth2

; create a tape device, you never know
set tq enable
set tq tk70
att tq0 mua0.tape

; se attivi questo, perdi lo schermo qua sotto screen
; set console telnet=17100

set cpu conhalt
dep bdr 0
boot cpu
exit

you need the correct ka655.bin or ka655xbin or whatever the hell your fucking simh version need, to avoid a lot of diag / boot errors!

call it "vax.ini" in the same dir of the disk image,

launch vax from root user

With the above setup, vax will boot automagically. If you need to tweak and boot manually, simply write

boot dua0:

at the simh prompt.

ET VOILA', AVEC LA MERDE

ethernet holocaust

vax.ini ha settato "eth0". su corazzini parte da eth3 PERCHE' UDEV MERDA PORCODIO.

ma eth0 viene visto su eth3, che ha l'ip di corazzini.

ora se tiri su anche eth4 ed eth5, puoi avere altri vax.ini su eth1 ed eth2.

HAI CAPITO PORCODIO?

== problemino con mmm.exe ===

Sto gioco ha bisogno di una patch:

> suspend



ENTER FILENAME TO STORE IT UNDER (0 TO ABORT REQUEST)



?a.sav



YOUR CURRENT SITUATION IS SAVED AND WILL BE GOOD FOR ANY REVISION 16

YOU CAN NOW QUIT OR CONTINUE. ENTER RESTORE, AT ANY TIME, TO LOAD THE

SITUATION YOU SUSPENDED



WHEN YOU ARE FINISHED, PURGE THE FILE.

           

> restore



ENTER FILENAME IT WAS SUSPENDED UNDER (0 TO ABORT REQUEST)



?a.sav

%FOR-F-INPSTAREQ, input statement requires too much data

  unit 55  file SYS_USERS:[LUTHER]A.SAV;1

  user PC 0002278B


SNORRY::LUTHER$ 


Non e' grave, visto che il gioco al massimo dura 450 mosse,
ma e' una cosa abbastanza antipatica.

Si aggiusta facilmente cambiando un byte con patch:
$ patch mmm.exe
PATCH>depo/long
LOC>0002278B
NEW>5901043D
NEW>exit
old:    0002278B:  5901283D
new:    0002278B:  5901043D
PATCH>update
%PATCH-I-WRTFIL, updantig image file DUA1:[GIASSI]MMM.EXE;2
Non mi ricordo di aver avuto questo problema quando ci ho giocato 
30 e passa anni fa, ma e' possibile che non sapessi nemmeno 
che il comando per salvare fosse 'suspend'.

da una mail di Sandro Giassi

Creare utenti by Gerry

N.B. Tutto questo funziona a patto che l'utente DEFAULT non abbia subito modifiche "strane" e che SYS_USERS sia un nome logico valido

In AUTHORIZE

Cercare il primo UIC (ottale!) libero con

SHOW [200,*]/BRIEF

poi

ADD <utente>/PASSWORD=<qualcosa>/OWNER="Nome Utente"/ACCOUNT=USERS/UIC=[200,<qualcosa>]/DEVICE=SYS_USERS/DIRECTORY=[<utente>]/NOPWDLIFETIME/FLAG=NODISUSER

ADD/PROXY *::<utente> <utente>/DEFAULT

In DISKQUOTA (se le quote sono attive, cfr. QUOTA.SYS)

Uno solo dei seguenti in base alle esigenze:

ADD [<utente>] (così aggiunge con i default presi da [0,0])

ADD [<utente>]/PERMQUOTA=<qualcosa>/OVERDRAFT=<qualcosa> (se si omette uno dei due qualificatori, per quel valore prende i default da [0,0])

Al prompt (dopo aver creato l'utente)

CREATE/DIRECTORY SYS_USERS:[<utente>]/OWNER=[<utente>]

Licenze vax/vms

ATTENZIONE

Il file delle licenze che ti mandano oggi e' pieno di CR / LF ad minchiam. VA CONVERTITO CON dos2unix prima di caricarlo sul vax altrimenti da' un mare di errori.

IMPORTANTE NON FARLE SCADERE ALTRIMENTI I CAZZI IN CULO SI MOLTIPLICANO A DISMISURA

sucati le licenze da decus usa, anzi no, da montagar.com, anzi no, da encompass, anzi no! da https://www.hpe.com/h41268/live/index_e.aspx?qid=24548

usa i numeri decus:

<suco> guarda e' qui
<asbesto> asbesto@gemini:~/licenzevms$ ls
<asbesto> cazzo  glorry  glorry~  howto  snorry  snorry~
<asbesto> asbesto@gemini:~/licenzevms$
<suco>  /AUTHORIZATION=DECUS-USA-904422-1257142 -
<asbesto> perfetto, allora ce l'ho
<suco> 904422
<suco> e' il mio id
<asbesto> snorry:/AUTHORIZATION=DECUS-USA-908286-1224202 -
<asbesto> bene
<suco> quello al momento e' l'unica cosa che ti serve per generare le licenze

se le licenze sono gia' scadute devi caricare come prima cosa UCX, che e' il tcpip.

Gerardo Cacciari, [23.03.19 12:47]
dicevo: il db delle licenze è l'unico file *.ldb in sys$system
e dicevo anche che però in caso di cluster bisogna stare piu attenti a quel che si fa
ma visto che questo non è un cluster basta cancellare fisicamente quel file

GLORRY::SYSTEM$ dir sys$system:*.ldb.*

Directory SYS$COMMON:[SYSEXE]

LMF$LICENSE.LDB;1

Total of 1 file.
GLORRY::SYSTEM$

GLORRY::SYSTEM$ del/conf sys$system:LMF$LICENSE.LDB;1
DELETE SYS$COMMON:[SYSEXE]LMF$LICENSE.LDB;1 ? [N]: y
GLORRY::SYSTEM$



ora creare database nuovo: dare semplicemente

LIC CRE

Gerardo Cacciari, [23.03.19 13:00]
ora carichi le licenze che ti servono, quelle fondamentali
vms tcp e decnet
rispettivamente

vax-vms ucx dvnetend


creo un fiile con dentro ste 3 licenze, copy/paste in un .com:

Gerardo Cacciari, [23.03.19 13:07]
non importava il resto, i vari enable e disable
l'importante sono i license register
il resto non serve a niente e fa solo casino
tanto non hai licenze caricate e non hai licenze nel db (dato che è nuovo)

quindi solo le tre parti LICENSE REGISTER

crea peto.com
(copy/paste)
CTRL-Z

dopodiche' lancio

@peto

poi LIC LOAD

e le carica tutte

con SH LIC vedi le licenze caricate.

eventualmente (glorry) vedi anche licenze infinite che sono rimaste in memoria ma non stanno piu' nel DB che e' stato cancellato prima.

se ora riavvio, vien su con quelle licenze caricate :)

ma carichiamo le 4 licenze infinite di glorry:

GLORRY::SYSTEM$ set def dua0:[data.lic]
GLORRY::SYSTEM$ dir

Directory DUA0:[DATA.LIC]

BLISS_PAK.COM;1     DIBOL_PAK.COM;1     FTSV_PAK.COM;1      SCAN_PAK.COM;1
VMS_PAKS_END_20110719.BCK;1             VMS_PAKS_END_20140124.COM;1
VMS_PAKS_END_20160513.COM;1             VMS_PAKS_END_20170714.COM;1

Total of 8 files.
GLORRY::SYSTEM$

quindi eseguo @bliss_pak etc. etc. 


e poi RIAVVIARE!!!

al riavvio puoi settare il TCPIP. 


POI carichi il file delle licenze, infine, con ftp, su una tua utenza, ci vai e lo lanci

Gerardo Cacciari, [23.03.19 15:00]
SNORRY::RPT$ sho log users
   "USERS" = "SYS_DISK:[USERS]" (LNM$SYSTEM_TABLE)
SNORRY::RPT$ sho log sys_users
   "SYS_USERS" = "SNORRY$DKA0:[USERS.]" (LNM$SYSTEM_TABLE)
SNORRY::RPT$

Gerardo Cacciari, [23.03.19 15:00]
Uno è rooted e l'altro no

ergo

set def sys_users
set def [asbesto]

@filedelcazzo

e attendi

SE hai rete / ti sei ricordato prima della scadenza:

crea un file con le licenze base e layered insieme, ascii

entra nel vax da system

sucati con ftp IN ASCII il file delle licenze

rinominalo .com

poi:

lic dis *
lic del *
@nomedelfile.com
lic load
lic ena *

fine!

Configurazione tcpip

lancia @sys$manager:tcpip$config

va solo cambiata l'interfaccia, per glorry, poiche' ha gia' i settings. ora e' su emu ed e' differente

poi va eliminata la vecchia interfaccia di glorry, che pare essere ze0

vedi tutto da "tcpip", "sh int" "sh con int"

ergo

set conf nointerf ze0

exit o ctrl-z e tcpip e' a posto!

riavviare tcpip per vedere se ci sono errori strani lo fai dal menu di @sys$manager:tcpip$config

POI va fatto questo:

$! RPT 23-MAR-2019
$
$  ON ERROR THEN GOTO END_LOOP
$  ON CONTROL_Y THEN GOTO END_LOOP
$
$  IF F$SEARCH("POST_DECNET_SETUP.TMP;*") .NES. "" THEN -
      DELETE/NOLOG POST_DECNET_SETUP.TMP;*
$
$  MCR NCP SHOW KNOWN LINES TO POST_DECNET_SETUP.TMP
$  OPEN/READ LINE_LIST POST_DECNET_SETUP.TMP
$
$LOOP:
$  READ/END=END_LOOP LINE_LIST LINE_ENTRY
$
$  LINE_ITEM = F$EDIT(LINE_ENTRY,"TRIM,COMPRESS")
$  LINE_ITEM = F$ELEMENT(0," ",LINE_ITEM)
$
$   IF (LINE_ITEM .EQS. "") .OR. -
       (LINE_ITEM .EQS. "Known") .OR. -
       (LINE_ITEM .EQS. "Line") THEN GOTO LOOP
$
$  WRITE SYS$OUTPUT "Line/Circuit ",LINE_ITEM
$
$  MCR NCP SET    CIRCUIT 'LINE_ITEM' STATE OFF
$  MCR NCP SET    LINE    'LINE_ITEM' STATE OFF
$
$  MCR NCP SET    LINE    'LINE_ITEM' BUFFER SIZE 1456
$  MCR NCP DEFINE LINE    'LINE_ITEM' BUFFER SIZE 1456
$  MCR NCP SET    CIRCUIT 'LINE_ITEM' HELLO TIMER 90
$  MCR NCP DEFINE CIRCUIT 'LINE_ITEM' HELLO TIMER 90
$
$  MCR NCP SET    LINE    'LINE_ITEM' STATE ON
$  MCR NCP SET    CIRCUIT 'LINE_ITEM' STATE ON
$
$  GOTO LOOP
$
$END_LOOP:
$  CLOSE LINE_LIST
$  IF F$SEARCH("POST_DECNET_SETUP.TMP;*") .NES. "" THEN -
      DELETE/NOLOG POST_DECNET_SETUP.TMP;*
$
$  EXIT

ora, DECNET E BRIDGE SEMENTALE

Problemi al disco

anal /disk

ana/disk/repair

porcoddio

decnet settings

$! RPT 23-MAR-2019
$
$  ON ERROR THEN GOTO END_LOOP
$  ON CONTROL_Y THEN GOTO END_LOOP
$
$  DEFINE/USER SYS$OUTPUT NL:
$  DEFINE/USER SYS$ERROR NL:
$  DELETE/NOLOG POST_DECNET_SETUP.TMP;*
$
$  MCR NCP SHOW KNOWN LINES TO POST_DECNET_SETUP.TMP
$  OPEN/READ LINE_LIST POST_DECNET_SETUP.TMP
$
$LOOP:
$  READ/END=END_LOOP LINE_LIST LINE_ENTRY
$
$  LINE_ITEM = F$EDIT(LINE_ENTRY,"TRIM,COMPRESS")
$  LINE_ITEM = F$ELEMENT(0," ",LINE_ITEM)
$
$   IF (LINE_ITEM .EQS. "") .OR. -
       (LINE_ITEM .EQS. "Known") .OR. -
       (LINE_ITEM .EQS. "Line") THEN GOTO LOOP
$
$  MCR NCP SET    CIRCUIT 'LINE_ITEM' STATE OFF
$  MCR NCP SET    LINE    'LINE_ITEM' STATE OFF
$
$  MCR NCP SET    LINE    'LINE_ITEM' BUFFER SIZE 1456
$  MCR NCP DEFINE LINE    'LINE_ITEM' BUFFER SIZE 1456
$  MCR NCP SET    CIRCUIT 'LINE_ITEM' HELLO TIMER 90
$  MCR NCP DEFINE CIRCUIT 'LINE_ITEM' HELLO TIMER 90
$
$  MCR NCP SET LINE       'LINE_ITEM' STATE ON
$  MCR NCP SET CIRCUIT    'LINE_ITEM' STATE ON
$
$  GOTO LOOP
$
$END_LOOP:
$  CLOSE LINE_LIST
$  DELETE/NOLOG POST_DECNET_SETUP.TMP;*
$
$  EXIT

vmsterm

vmsterm

funge bene, usa xterm, permette EDIT da rt11!!!

#               vmsterm
#               from an original script by Bob Ess
#               key translations by Erik Ahlefeldt
#
#               Script file using Xterm and telnet to connect to a VMS host
#               and give a decent vt220 emulation.
#
#               Some adjustment made by asbesto@freaknet.org
#               25-DEC-2014
#
# Usage statement
Usage(){
        echo
        echo " Usage  : vmsterm -options"
        echo
        echo " Options: -80   for 80 column terminal"
        echo "          -132  for 132 column terminal"
        echo "          -bg colorname"
        echo "          -fg colorname"
        echo "          -fn fontname"
        echo "          -fb bold fontname"
        echo "          -host [crusher.saltmine.com] [earth] [192.168.7.7]"
        echo "          -port portnum"
        echo ""
        echo " Example: \"vmsterm -80 -fg white -bg black -fn 9x15 -fb 9x15b -host earth\""
        echo "          Starts a VMS session with an 80 column terminal"
        echo "          with a black background, white foreground, a normal"
        echo "          font of 9x15 and a bold font of 9x15b, and connects"
        echo "          to the node 'earth'"
        echo ""
        echo " Example: \"vmsterm -host earth -port portnum\""
        echo "          Starts a VMS session with default terminal settings "
        echo ""
        echo " Example: \"vmsterm -help\""
        echo "          Displays vmsterm options "
        echo
        exit 1
}
 
# Default to a black foreground with a white background.
# Use the 9x15 and 9x15bold fonts. Connect to 192.168.3.3 by default.
#
FG=black
BG=white
HOST="museo.freaknet.org"
PORT="1134"
FONT=10x20
BFONT=9x15bold
COLS=80
 
# Parse the command line arguments
#
while [ $# != 0 ];
do
        case $1 in
                -80)    COLS=80
                        FONT=spc12x24c
                        BFONT=spc12x24b
                        shift
                        ;;
                -132)   COLS=132
                        FONT=9x15
                        BFONT=9x15b
                        shift
                        ;;
                -fg)    shift
                        FG=$1
                        shift;;
                -bg)    shift
                        BG=$1
                        shift;;
                -fn)    shift
                        FONT=$1
                        shift;;
                -fb)    shift
                        BFONT=$1
                        shift;;
                -host)  shift
                        HOST=$1
                        shift;;
                -port)  shift
                        PORT=$1
                        shift;;
                -help)  Usage;;
                *)      Usage;;
        esac
done

xterm   -title "VMSTERM" -sb -sl 1000 -geo ${COLS}x24 -fg ${FG} -bg ${BG} \
        -cr blue -fn ${FONT} -fb ${BFONT} -xrm \
        'XTerm*VT100.translations: #override \n \
        ~Shift  <Key>F1:        string(0x1b)    string("OP") \n \
        ~Shift  <Key>F2:        string(0x1b)    string("OQ") \n \
        ~Shift  <Key>F3:        string(0x1b)    string("OR") \n \
        ~Shift  <Key>F4:        string(0x1b)    string("OS") \n \
        ~Shift  <Key>F5:        string("Break") \n \
        ~Shift  <Key>F6:        string(0x1b)    string("[17~") \n \
        ~Shift  <Key>F7:        string(0x1b)    string("[18~") \n \
        ~Shift  <Key>F8:        string(0x1b)    string("[19~") \n \
        ~Shift  <Key>F9:        string(0x1b)    string("[20~") \n \
        ~Shift  <Key>F10:       string(0x1b)    string("[21~") \n \
        ~Shift  <Key>F11:       string(0x1b)    string("[23~") \n \
        ~Shift  <Key>F12:       string(0x1b)    string("[24~") \n \
        Shift   <Key>F1:        string(0x1b)    string("[23~") \n \
        Shift   <Key>F2:        string(0x1b)    string("[24~") \n \
        Shift   <Key>F3:        string(0x1b)    string("[25~") \n \
        Shift   <Key>F4:        string(0x1b)    string("[26~") \n \
        Shift   <Key>F5:        string(0x1b)    string("[28~") \n \
        Shift   <Key>F6:        string(0x1b)    string("[29~") \n \
        Shift   <Key>F7:        string(0x1b)    string("[31~") \n \
        Shift   <Key>F8:        string(0x1b)    string("[32~") \n \
        Shift   <Key>F9:        string(0x1b)    string("[33~") \n \
        Shift   <Key>F10:       string(0x1b)    string("[34~") \n \
        Shift   <Key>F11:       string(0x1b)    string("[28~") \n \
        Shift   <Key>F12:       string(0x1b)    string("[29~") \n \
                <Key>Print:     string(0x1b)    string("[28~") \n \
                <Key>Cancel:    string(0x1b)    string("[29~") \n \
                <Key>Pause:     string(0x1b)    string("Om") \n \
                <Key>Insert:    string(0x1b)    string("[2~") \n \
                <Key>Delete:    string(0x1b)    string("[3~") \n \
                <Key>Home:      string(0x1b)    string("[1~") \n \
                <Key>End:               string(0x1b)    string("[4~") \n \
                <Key>Prior:     string(0x1b)    string("[5~") \n \
                <Key>Next:      string(0x1b)    string("[6~") \n \
                <Key>BackSpace: string(0x7f)    \n \
                <Key>Num_Lock:  string(0x1b)    string("OP") \n \
                <Key>KP_Divide: string(0x1b)    string("OQ") \n \
                <Key>KP_Multiply: string(0x1b)  string("OR") \n \
                <Key>KP_Subtract: string(0x1b)  string("OS") \n \
                <Key>KP_Add:    string(0x1b)    string("Ol") \n \
                <Key>KP_Enter:  string(0x1b)    string("OM") \n \
                <Key>KP_Decimal: string(0x1b)   string("On") \n \
                <Key>KP_0:      string(0x1b)    string("Op") \n \
                <Key>KP_1:      string(0x1b)    string("Oq") \n \
                <Key>KP_2:      string(0x1b)    string("Or") \n \
                <Key>KP_3:      string(0x1b)    string("Os") \n \
                <Key>KP_4:      string(0x1b)    string("Ot") \n \
                <Key>KP_5:      string(0x1b)    string("Ou") \n \
                <Key>KP_6:      string(0x1b)    string("Ov") \n \
                <Key>KP_7:      string(0x1b)    string("Ow") \n \
                <Key>KP_8:      string(0x1b)    string("Ox") \n \
                <Key>KP_9:      string(0x1b)    string("Oy") \n \
        ~Shift  <Key>Up:                string(0x1b)    string("[A") \n \
        Shift   <Key>Up:                scroll-back(1,lines) \n \
        ~Shift  <Key>Down:      string(0x1b)    string("[B") \n \
        Shift   <Key>Down:      scroll-forw(1,lines) \n \
                <Key>Right:     string(0x1b)    string("[C") \n \
                <Key>Left:      string(0x1b)    string("[D")' \
         -e telnet $HOST $PORT


CategoryMuseo

VAXAppunti (last edited 2022-01-05 16:38:51 by asbesto)