Differences between revisions 7 and 26 (spanning 19 versions)

Dyne:bolic Hardware Compatability Page

I have tested dyne:bolic 1.1.1 on the following hardware, and here's how it fared...

Note: the PCI cards that worked after modprobe may not have been auto-detected because pcimodules dumps core on my test computer

Computers

Dell Dimension L500cx

Perfect, except for Armagetron which, on five out of 8 "identical" machines, locks the computer solid, leaving a pink pastel random-pixel flashing random image on the screen, and mplayer crashing out.

Compaq Deskpro 5150 (150 MHz Pentium non-MMX)	No. The system doesn't seem to boot off CDROMs.
Compaq Deskpro 2000/5200MMX	Perfect, except that mplayer crashes out.
Compaq Deskpro 2000/5233MMX	Perfect, except that mplayer crashes out.
Gateway 2000	1.0 & 1.1.1 are said to be OK!
Sony Vaio	1.0 and 1.1.1 are said to be OK!
Dell Latitude CPx H500GT	text mode yes, X no (see ATI Rage Mobility below)
HP pavilion ze5400	Yes, but limited to 800x600 (not fullscreen), can't see pen drive.
Dell Inspiron 8600	(w/ Radeon 9600) Yes, but limited to 800x600 and some windows don't fit on scree due to wide aspect ratio, no audo.
Dell latitude 700mhz	(No problem fantastic !) with ati 16...
IBM Netfinity 3500 m10 Dual 500mhz	(No problem fantastic !) with S3 Savage 2000 AGP Video...
HP pavilion ze4500	Almost Yes, but troubles with ACPI. At the boot prompt, try acpi=no
Dell latitude C600 850mhz	Yes works fine and works with Cisco LM 340 card bus wireless card
IBM ThinkPad T30	Works just fine for me. No suspend/hibernation powersave mode, but who cares.

Processors

Intel Pentium MMX 200 & 233 MHz [Compaq Deskpro 2000/5200MMX & 5233MMX]

Yes, but mplayer and pcimodules crash out with illegal instruction.

Intel Pentium MMX 233 MHz [Compaq Deskpro 2000/5233MMX]	Yes, but mplayer and pcimodules crash out with illegal instruction.
Intel Pentium II 350Mhz [80523PY350512PE SL2U4 - Philippines]	Yes, but not thoroughly tested (dyne:bolic 1.4.1)
Intel Celeron (Mendocino) 500 MHz [Dell Dimension L500cx]	Yes, but mplayer crashes out with illegal instruction.
AMD-K6(tm) 3D processor 400 MHz and 500 MHz	Yes, but mplayer and pcimodules crash out with illegal instruction.
Intel Pentium III (Coppermine)	Yes!
AMD XP1900+ Palamino 1600MHz	Yes, no strangeness to report.
AMD XP2000+ Thoroughbred *MHz	Yes, no strangeness to report.
AMD XP2500+ Barton 2033MHz/214MHz-FSB	Yes, but not thoroughly tested. (dyne:bolic 1.4.1)
AMD Athlon 64 2800+ 1800MHz	Yes, no strangeness to report.

Motherboards

Model

Works?

Comments

MSI K7NF2 Delta-L Ultra 400

Yes, but not thoroughly tested

(dyne:bolic 1.4.1)

Memory

Size

Type

No. of Sticks & Sizes

Controller

Comments

768MB

DDR/PC3200

2 / 512MB + 256MB

Nforce2 Dual Channel Mode

IDE controllers

Chip

Works?

SiS530

Yes!

VIA VT82C586B

Yes!

Intel 82371 PIIX4

Yes!

Nvidia Nforce2 ATA

Yes! But not thoroughly tested (dyne:bolic 1.4.1)

USB controllers

Name

Type

Works?

Intel 82801AA (Rev 02) (in Dell L500cx)	UHCI	Yes with usb-uhci but Nokia 5510 crashes the machine
SiS USB 1.0 Controller	OHCI	Don't know - pcimodules gets illegal instruction

On-board video chips

Name

Chip

Bus

Works?

S3 Trio 64V2/GX

86C785

PCI

Yes!

Dell Dimension L500cx

i810

PCI

All except armagetron on 5 out of 8 machines

Video cards

Name

Chip number

Bus

Works?

ATI Radeon 9200 SE	RV280(?)	PCI	No. When X starts, It blinks and then says it cannot find the device in any video mode.
ATI Radeon 9600 Pro		?	No. As soon as it gets past "Loading initrd..." we just get a black screen
ATI Radeon 9600 128MB		AGP	X Works fine here. (specific model unknown)
ATI Rage Mobility P/M AGP 2x	?	AGP	No. As soon as it switches to graphic mode, the screen goes black and then fades slowly and plasmagorically to white
S3 Trio 3D/2X "On Board"	86C368	AGP	Yes!
S3 Trio 64V+ SPIDER BIOS		PCI	Yes but: 1) Image is offset 1cm to the left and has 1cm black border at bottom. 2) Splash screen tab edges have white and black guy ropes & moving the splash screen right leaves a white blob on the screen at tab left bottom.
S3 Trio 64V+ Diamond Multimedia		PCI	As above. Armagetron gives black screen but doesn't crash the computer.
S3 Trio 32	86C732-P	PCI	As above.
SIS6326 AGP 4MB	SIS6326	AGP	Yes, but not fully tested (dyne:bolic 1.4.1)
Tseng Labs ET6000 (BIOS V1.4)	ET6000	PCI	Yes! (FB)
Cirrus Logic (CL/Quadtel video BIOS)	CL-GD5343-QC-F	PCI	Well, er.. yes, sort of. Looks like my card has dodgy VRAM.
Matrox MGA Mystique	MGA-1064SG-H	PCI	Yes! 1024x768!
2 the MAX	ARK1000PV	PCI	No. X doesn't start up.
Trident	TVGA9000B	ISA-16	No. X doesn't start up.
NVIDIA Geforce 4 MX440 64MB			Yes, no strangeness to report.
NVIDIA FX5200 128MB			Yes, no strangeness to report.
Voodoo 3			Yes, no strangeness to report.
NVIDIA FX56000 VTDR 128MB (MSI)	-	AGP	Yes, but not thoroughly tested, did not try TV out/in. (dyne:bolic 1.4.1)
NVIDIA Geforce 5700 Ultra		AGP	No. When desktop loads, Monitor cannot synch. (LGP Flatron L1750S)

Display

Monitor

Works?

Comments

Compac P700 Trinitron 17"

Yes

60Hz Refresh Rate shifts screen far to the right (dyne:bolic 1.4.1)

Ethernet cards

Name

Chip

Bus

Works?

3Com Etherlink III PCI 3x590 TPO	PCI	Yes, after modprobe 3x59x & pump
3Com Etherlink XL PCI 3C900-COMBO	PCI	Yes, after modprobe 3x59x & pump
3Com 3C905-TX	PCI	Yes, after modprobe 3c59x & pump
3Com Etherlink III 3x509	ISA-16	Yes, after modprobe 3c509 & pump
3Com Etherlink III 3x509-COMBO	ISA-16	Yes, after modprobe 3c509 & pump
3Com Etherlink III 3x509B

-  ⇤ ← Revision 7 as of 2004-01-17 14:35:29 → 
  Size: 6003
  Editor: anonymous
  Comment: Fix typography -m
+   ← Revision 26 as of 2008-03-15 18:00:33 → ⇥
  Size: 6467
  Editor: anonymous
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 2:
-Line 8:
+Line 7:
- || Dell Dimension L500cx || Perfect, except for Armagetron which, on five out of 8 "identical" machines, locks the computer solid, leaving a pink pastel random-pixel flashing random image on the screen, and mplayer crashing out. ||
+ .
|| Dell Dimension L500cx || Perfect, except for Armagetron which, on five out of 8 "identical" machines, locks the computer solid, leaving a pink pastel random-pixel flashing random image on the screen, and mplayer crashing out. ||
-Line 16:
+Line 15:
+ || HP pavilion ze5400 || Yes, but limited to 800x600 (not fullscreen), can't see pen drive. ||
 || Dell Inspiron 8600 || (w/ Radeon 9600) Yes, but limited to 800x600 and some windows don't fit on scree due to wide aspect ratio, no audo. ||
 || Dell latitude 700mhz || (No problem fantastic !) with ati 16... ||
 || IBM Netfinity 3500 m10 Dual 500mhz || (No problem fantastic !) with S3 Savage 2000 AGP Video... ||
 || HP pavilion ze4500 || Almost Yes, but troubles with ACPI. At the boot prompt, try acpi=no ||
 || Dell latitude C600 850mhz || Yes works fine and works with Cisco LM 340 card bus wireless card ||
 ||<^>IBM ThinkPad T30||<^>Works just fine for me. No suspend/hibernation powersave mode, but who cares. ||
-Line 19:
+Line 23:
- || Intel Pentium MMX 200 & 233 MHz [Compaq Deskpro 2000/5200MMX & 5233MMX] || Yes, but mplayer and pcimodules crash out with illegal instruction. ||
+ .
|| Intel Pentium MMX 200 & 233 MHz [Compaq Deskpro 2000/5200MMX & 5233MMX] || Yes, but mplayer and pcimodules crash out with illegal instruction. ||
-Line 22:
+Line 26:
+ || Intel Pentium II 350Mhz [80523PY350512PE SL2U4 - Philippines] || Yes, but not thoroughly tested (dyne:bolic 1.4.1) ||
-Line 27:
+Line 32:
+ || AMD XP2500+ Barton 2033MHz/214MHz-FSB || Yes, but not thoroughly tested. (dyne:bolic 1.4.1) ||
 || AMD Athlon 64 2800+ 1800MHz || Yes, no strangeness to report. ||
== Motherboards ==
 .
|| Model || Works? || Comments ||
 || MSI K7NF2 Delta-L Ultra 400 || Yes, but not thoroughly tested || (dyne:bolic 1.4.1) ||
== Memory ==
 .
|| Size || Type || No. of Sticks & Sizes || Controller ||  Comments ||
 || 768MB || DDR/PC3200 || 2 / 512MB + 256MB || Nforce2 Dual Channel Mode || ||
-Line 29:
+Line 43:
- || Chip || Works? ||
+ .
|| Chip || Works? ||
-Line 34:
+Line 48:
+ || Nvidia Nforce2 ATA || Yes! But not thoroughly tested (dyne:bolic 1.4.1) ||
-Line 36:
+Line 50:
-  || Name || Type || Works? ||
  || Intel 82801AA (Rev 02) (in Dell L500cx) || UHCI || Yes with usb-uhci but Nokia 5510 crashes the machine ||
  || SiS USB 1.0 Controller || OHCI || Don't know - pcimodules gets illegal instruction ||
+ .
|| Name || Type || Works? ||
 || Intel 82801AA (Rev 02) (in Dell L500cx) || UHCI || Yes with usb-uhci but Nokia 5510 crashes the machine ||
 || SiS USB 1.0 Controller || OHCI || Don't know - pcimodules gets illegal instruction ||
-Line 42:
+Line 55:
-  || Name            || Chip   || Bus || Works? ||
  || S3 Trio 64V2/GX || 86C785 || PCI || Yes!   ||
  || Dell Dimension L500cx || i810   || PCI || All except armagetron on 5 out of 8 machines ||
+ .
|| Name || Chip || Bus || Works? ||
 || S3 Trio 64V2/GX || 86C785 || PCI || Yes! ||
 || Dell Dimension L500cx || i810 || PCI || All except armagetron on 5 out of 8 machines ||
-Line 48:
+Line 60:
-  || Name                        || Chip number  || Bus || Works? ||
  || ATI Radeon 9600 Pro         ||              || ?   || No. As soon as it gets past "Loading initrd..." we just get a black screen ||
  || ATI Rage Mobility P/M AGP 2x || ? || AGP || No. As soon as it switches to graphic mode, the screen goes black and then fades slowly and plasmagorically to white ||
  || S3 Trio 3D/2X "On Board"    || 86C368       || AGP || Yes! ||
  || S3 Trio 64V+ SPIDER BIOS    ||              || PCI || Yes but: 1) Image is offset 1cm to the left and has 1cm black border at bottom.  2) Splash screen tab edges have white and black guy ropes & moving the splash screen right leaves a white blob on the screen at tab left bottom. ||
  || S3 Trio 64V+ Diamond Multimedia ||          || PCI || As above. Armagetron gives black screen but doesn't crash the computer. ||
  || S3 Trio 32                  || 86C732-P     || PCI || As above. ||
  || Tseng Labs ET6000 (BIOS V1.4) || ET6000     || PCI || Yes! (FB) ||
  || Cirrus Logic (CL/Quadtel video BIOS) || CL-GD5343-QC-F || PCI || Well, er.. yes, sort of. Looks like my card has dodgy VRAM. ||
  || Matrox MGA Mystique         || MGA-1064SG-H || PCI || Yes! 1024x768! ||
  || 2 the MAX                   || ARK1000PV    || PCI || No.  X doesn't start up. ||
  || Trident                     || TVGA9000B    || ISA-16 || No.  X doesn't start up. ||
  || NVIDIA Geforce 4 MX440 64MB || || || Yes, no strangeness to report. ||
  || NVIDIA FX5200 128MB || || || Yes, no strangeness to report. ||
+ .
|| Name || Chip number || Bus || Works? ||
 || ATI Radeon 9200 SE ||   RV280(?) || PCI || No. When X starts, It blinks and then says it cannot find the device in any video mode. ||
 || ATI Radeon 9600 Pro || || ? || No. As soon as it gets past "Loading initrd..." we just get a black screen ||
 || ATI Radeon 9600 128MB || || AGP || X Works fine here. (specific model unknown) ||
 || ATI Rage Mobility P/M AGP 2x || ? || AGP || No. As soon as it switches to graphic mode, the screen goes black and then fades slowly and plasmagorically to white ||
 || S3 Trio 3D/2X "On Board" || 86C368 || AGP || Yes! ||
 || S3 Trio 64V+ SPIDER BIOS || || PCI || Yes but: 1) Image is offset 1cm to the left and has 1cm black border at bottom.  2) Splash screen tab edges have white and black guy ropes & moving the splash screen right leaves a white blob on the screen at tab left bottom. ||
 || S3 Trio 64V+ Diamond Multimedia || || PCI || As above. Armagetron gives black screen but doesn't crash the computer. ||
 || S3 Trio 32 || 86C732-P || PCI || As above. ||
 || SIS6326 AGP 4MB || SIS6326 || AGP || Yes, but not fully tested (dyne:bolic 1.4.1) ||
 || Tseng Labs ET6000 (BIOS V1.4) || ET6000 || PCI || Yes! (FB) ||
 || Cirrus Logic (CL/Quadtel video BIOS) || CL-GD5343-QC-F || PCI || Well, er.. yes, sort of. Looks like my card has dodgy VRAM. ||
 || Matrox MGA Mystique || MGA-1064SG-H || PCI || Yes! 1024x768! ||
 || 2 the MAX || ARK1000PV || PCI || No.  X doesn't start up. ||
 || Trident || TVGA9000B || ISA-16 || No.  X doesn't start up. ||
 || NVIDIA Geforce 4 MX440 64MB || || || Yes, no strangeness to report. ||
 || NVIDIA FX5200 128MB || || || Yes, no strangeness to report. ||
 || Voodoo 3 || || || Yes, no strangeness to report. ||
 || NVIDIA FX56000 VTDR 128MB (MSI) || - || AGP || Yes, but not thoroughly tested, did not try TV out/in. (dyne:bolic 1.4.1) ||
 || NVIDIA Geforce 5700 Ultra || ||AGP || No. When desktop loads, Monitor cannot synch. (LGP Flatron L1750S) ||
== Display ==
 .
|| Monitor || Works? || Comments ||
 || Compac P700 Trinitron 17" || Yes || 60Hz Refresh Rate shifts screen far to the right (dyne:bolic 1.4.1) ||
-Line 65:
+Line 86:
-  || Name                              || Chip     || Bus    || Works? ||
  || 3Com Etherlink III PCI 3x590 TPO  ||          || PCI    || Yes, after modprobe 3x59x & pump ||
  || 3Com Etherlink XL PCI 3C900-COMBO ||          || PCI    || Yes, after modprobe 3x59x & pump ||
  || 3Com 3C905-TX                     ||          || PCI    || Yes, after modprobe 3c59x & pump ||
  || 3Com Etherlink III 3x509          ||          || ISA-16 || Yes, after modprobe 3c509 & pump ||
  || 3Com Etherlink III 3x509-COMBO    ||          || ISA-16 || Yes, after modprobe 3c509 & pump ||
  || 3Com Etherlink III 3x509B (PnP)   ||          || ISA-16 || Yes, after modprobe 3c509 & pump ||
  || 3Com Etherlink III 3x509B-TX (PnP)||          || ISA-16 || Yes, after modprobe 3c509 & pump ||
  || Compaq Netelligent 10/100 TX PCI Intel UTP || Intel SB82558B || PCI || Yes, after modprobe eepro100 & pump ||
  || Genius LAN                        || K1306023 || ISA-16 || Not tried yet... ||
  || Novell Inc.                       || DP8390CN || ISA-8  || Yes, after "modprobe ne io=0x300" & pump ||
  || Realtek                           || RTL8019A || ISA-16 || They say "It is NE2000-compatible"... but I can't see it! ||
  || SMC                               || 83C795QF P || ISA-16 || Yes, after "modprobe smc-ultra" & pump ||

== Sound cards ==

'''Note: Creative Labs Soundblasters:'''

The non-PnP boards need to have the jumpers set to io=0x220, irq=5, dma=1, dma16=5
and you need to say "modprobe sb" explicitly to enable them.

  || Name || Board no. || Bus || Works? ||
  || Creative Labs Sound Blaster 16 || CT2290 || ISA-16 || Yes, after modprobe sb ||
  || Creative Labs SB 16 Value || CT2770 || ISA-16 || Yes, after modprobe sb ||
  || Creative Labs  || CT3990 || ISA-16 || Yes, after modprobe sb ||
  || ESS AudioDrive || ES1868F || ISA-16 || Yes, after modprobe sb ||
  || OPTi 931 || OPTi 82C931 || ISA-16 || no ||
  || C-Media PCI Multimedia Controller (on 500MHz motherboard) || CM8738 || PCI || no ||
+ .
|| Name || Chip || Bus || Works? ||
 || 3Com Etherlink III PCI 3x590 TPO || || PCI || Yes, after modprobe 3x59x & pump ||
 || 3Com Etherlink XL PCI 3C900-COMBO || || PCI || Yes, after modprobe 3x59x & pump ||
 || 3Com 3C905-TX || || PCI || Yes, after modprobe 3c59x & pump ||
 || 3Com Etherlink III 3x509 || || ISA-16 || Yes, after modprobe 3c509 & pump ||
 || 3Com Etherlink III 3x509-COMBO || || ISA-16 || Yes, after modprobe 3c509 & pump ||
 || 3Com Etherlink III 3x509B || || || ||

SiS530	Yes!
VIA VT82C586B	Yes!
Intel 82371 PIIX4	Yes!
Nvidia Nforce2 ATA	Yes! But not thoroughly tested (dyne:bolic 1.4.1)

S3 Trio 64V2/GX	86C785	PCI	Yes!
Dell Dimension L500cx	i810	PCI	All except armagetron on 5 out of 8 machines