Dyne:bolic Hardware Compatability Page

I have tested dyne:bolic 1.1.1 on the following hardware, and here's how it fared...

Note: the PCI cards that worked after modprobe may not have been auto-detected because pcimodules dumps core on my test computer :(

Computers

Processors

IDE controllers

USB controllers

On-board video chips

Video cards

Ethernet cards

Sound cards

Note: Creative Labs Soundblasters:

The non-PnP boards need to have the jumpers set to io=0x220, irq=5, dma=1, dma16=5 and you need to say "modprobe sb" explicitly to enable them.