Differences between revisions 2 and 3
Revision 2 as of 2021-01-01 14:50:27
Size: 573
Editor: asbesto
Comment:
Revision 3 as of 2021-01-01 16:17:16
Size: 829
Editor: asbesto
Comment:
Deletions are marked like this. Additions are marked like this.
Line 12: Line 12:
Turn on the FD before the fluxengine usb cable. Turn on the FD FIRST, and connect the fluxengine usb cable AFTER. Drive must turn LED on for about 2 seconds, eventually parking the head.
Line 14: Line 14:
If LED is fixed ON, this means some cable are upside down!
Line 22: Line 22:
 * Read IBM PC 360K Floppy disk on a 1.2MB DRIVE: ./fluxengine read ibm -s:t=0-79x2 -o petacci12.img

Appunti sull'uso della stracazzo di fluxengine

== Hardware connections =

  • Flat cable pin 1 to the micro-USB side.
  • Non-inverted floppy connection to the drive! Red wire to the dent side.

Turn on the FD FIRST, and connect the fluxengine usb cable AFTER. Drive must turn LED on for about 2 seconds, eventually parking the head.

If LED is fixed ON, this means some cable are upside down!

./fluxengine rpm must read the rpm speed. WITH A DISK INSIDE

Test cases

  • IBM PC 360K: ./fluxengine read ibm -s:t=0-40 -o petacci.img
  • IBM PC 1.2MB: ./fluxengine read ibm -o petacci.img (to be tested)
  • Read IBM PC 360K Floppy disk on a 1.2MB DRIVE: ./fluxengine read ibm -s:t=0-79x2 -o petacci12.img

FluxengineAppunti (last edited 2021-02-21 17:18:13 by asbesto)