Differences between revisions 7 and 10 (spanning 3 versions)
Revision 7 as of 2021-02-18 17:48:46
Size: 1258
Editor: asbesto
Comment:
Revision 10 as of 2021-02-18 19:30:00
Size: 1595
Editor: asbesto
Comment:
Deletions are marked like this. Additions are marked like this.
Line 10: Line 10:
 * Non-inverted floppy connection to the drive! Red wire to the dent side.  * Non-inverted floppy connection to the drive! Red wire to the dent side. This is the same for 5"1/4 and 8" disks.
Line 33: Line 33:

 * nome="prova"; fluxengine read ibm --retries=1 --revolutions=3 --overwrite --write-flux=^Come.flux --visualiser-period=167 --write-svg=$nome.svg -o $nome.img

svg test:

 * seq 1 380 | while read i; do fluxengine read ibm -s prova.flux --visualiser-period=$i --write-svg=$i.svg ; done

Appunti sull'uso della stracazzo di fluxengine

Hardware connections

  • Flat cable pin 1 to the micro-USB side.
  • Non-inverted floppy connection to the drive! Red wire to the dent side. This is the same for 5"1/4 and 8" disks.

Turn on the FD FIRST, and connect the fluxengine usb cable AFTER. Drive must turn LED on for about 2 seconds, eventually parking the head.

If LED is fixed ON, this means some cable are upside down!

./fluxengine rpm must read the rpm speed. WITH A DISK INSIDE

Test cases

  • IBM PC 360K disk on 360KB drive: ./fluxengine read ibm -s:t=0-40 -o petacci.img
  • ???IBM PC 1.2MB on 1.2MB drive: ./fluxengine read ibm -o petacci.img (to be tested)
  • IBM PC 360K Floppy disk on a 1.2MB DRIVE: ./fluxengine read ibm -s:t=0-79x2 -o petacci12.img
  • Read data and flux, IBM PC 360KB Disk on 360K drive: fluxengine read ibm -s:t=0-40 --retries=0 --revolutions=10 --overwrite --write-flux=testdisk.flux
  • M20: con drive da 1.2MB: fluxengine read ibm --retries=10 --revolutions=10 --write-flux=testdisk.flux

8 inches

  • fluxengine read ibm -s:t=0-76 --retries=1 --revolutions=3 --overwrite --write-flux=prova.flux -o prova.img

77?

  • nome="prova"; fluxengine read ibm --retries=1 --revolutions=3 --overwrite --write-flux=^Come.flux --visualiser-period=167 --write-svg=$nome.svg -o $nome.img

svg test:

  • seq 1 380 | while read i; do fluxengine read ibm -s prova.flux --visualiser-period=$i --write-svg=$i.svg ; done

FluxengineAppunti (last edited 2023-07-22 15:01:26 by asbesto)