20045
Comment:
|
17074
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
#acl FreaknetGroup:read,write,admin,delete,revert All: Template di base per pagine freaknet, con acl settate in base a FreakNetGroup. -asb = Milano = Per Milano abbiamo bisogno di uno SCHEDINO che mandi dei video e degli slideshow in modo automatico, che sia affidabile, si possa riavviare, sia accessibile da remoto, stia in rete e faccia anche il caffe'. Un primo sopralluogo e' stato fatto a Milano, ed i successivi lavori dal 4 all'8 Maggio 2015, in casa Roveda etc. :) Questo schedino e' il RASP PI, 4 core, nuovo. Puo' benissimo essere considerato il prototipo di WeBox, ottima base di partenza. h2. Istruzioni per riproduzione video / slideshow *I video .mp4 vanno uploadati SOLAMENTE nella directory /home/pi/video* *Le foto DEVONO essere uploadate SOLAMENTE nella directory /home/pi/foto* Uno script rigenerera' la lista dei video da mandare in play, leggendo la dir. /home/pi/video e creando la lista da capo ogni tot minuti / ad ogni riavvio. Questo vuol dire che ogni video uploadato sara' aggiunto in lista agli altri. *Se volete mandare in play UN SOLO VIDEO, allora dovete loggarvi nello schedino rasp relativo, entrare nella dir. /home/pi/video e cancellare a manina i video indesiderati.* h2. TODO URGENTE ASBESTO, APPUNTI *ffprobe non esiste perche' DEBIAN MERDA, SI CHIAMA avprobe. quindi dur.sh non funziona. quindi listamp4.sh non genera le liste. PORCO DIO. cambiando ffprobe in avprobe dentro dur.sh sistema tutto. da fare con ricettina di ansible per farlo su tutti i nodi.* __ h2. CARATTERISTICHE REALI (gia' realizzate) # Sistema basato su distro Raspbian (Debian ARM per Raspberry PI) aggiornata all'ultima release. # Tutto standard, niente repository strani o esoterici. # Immagine disco pronto con tutto quel che serve <3GB # Partizione di Boot in READ-ONLY ad evitare smerdamenti del FS in caso di spegnimento brutale. Pro: non si smerda il FS ed e' molto stabile. Contro: Crontab non funziona, "at" credo non funzioni nemmeno (serve ulteriore verifica) # Rete configurata in modo SEMPLICE tramite /etc/network/interface. Non serve NIENTE ALTRO. # Script di autoavvio bash molto semplice. Serie di script dentro /home/pi/shells/ # Rete configurabile via ETH0 o WLAN0, cavo o wifi. # hostname configurato automaticamente come "raspamiXX" con XX = ultima parte dell'IP della scheda wlan0 (si puo fare anche con eth0) # Schedine USB wifi gia' configurate per funzionare bene con il loro firmware gia' installato e pronto. # Implementa un wifi scanner per capire cosa il raspberry sente attorno a se. # Screensaver e screen blanking disabilitati # Sistema automatico di controllo rete: se si sente "disconnesso" riavvia la rete (e non il raspberry!) ricollegandosi, facendo il controllo ogni 2 minuti. # Accesso tramite VPN, automatico e con autocontrollo: se manca rete, quando torna, la VPN torna su senza problemi. Con mosh la connessione non cade *MAI*! # Accesso grafico tramite VNC stile teamviewer sempre tramite VPN ;) # Chromium installato per navigare / configurare apparati via vnc/vpn # ansible installato e pronto all'uso # ricette ansible per modificare automaticamente tutti i rasp in rete # pennini wifi senza il maledetto power saving: connessione finalmente stabile! (HACK) h2. CARATTERISTICHE DESIDERATE / IN LAVORAZIONE O STUDIO -* underclock sistema? non necessario al momento, non serve a un cazzo- * VPN gestita interamente dai nostri server (zaverio.com) (voyanet cmq e' affidabile ed io sono root su una macchina apposita, quindi non so quanto questo sia necessario) * Mplayer accelerato per rasp pi: fare check su quei 2 link che sono spariti * Test su programma in PYTHON per controllare OMXPlayer, che PARE usi addirittura OSC per fare solo POCHE cose. * Check telecamerina del raspberry e test di streaming audio/video |
## page was renamed from Museo/Webox #acl FreaknetGroup:read,write,admin,delete,revert All:read = Raspberry setup by Asbesto = A solid setup for a raspberry sending videos / slideshow, can be rebooted / accessed by remote vpn, and make coffee. This is for Rasp PI 3, quad core. == Howto about video / slideshow == * .mp4 files goes ONLY INTO /home/pi/video * Pictures goes ONLY INTO /home/pi/foto A script generate the video list to go on play, reading that dir /home/pi/video and creating a new list every X minutes or at every reboot. so every added video will be added to the playlist. To play only a particular video you must remove all others. == TODO ASBESTO, notepad == * ffprobe doesn't exist because DEBIAN SHIT, it was named avprobe. so dur.sh didn't worked. so listamp4.sh didn't generate any list. PORCODIO! changing ffprobe in avprobe inside dur.sh fixed everything. == Features == * Based on Raspbian * All standard repo's * Disk image ready with everything, <3GB * READ ONLY boot partition to avoid shit on the FS in case of brutal poweroff. But so, crontab doesn't work, "at" also maybe not. TO BE CHECKED * Simple network config in /etc/network/interface. Nothing else needed. * Very simple startup bash script that launch everything. Other scripts in /home/pi/shells/ * Network config via ETH0 o WLAN0, cable o wifi. * Automatic hostname as "raspamiXX" where XX = last number of the wlan0 IP address (same can be done with eth0) * USB wifi dongles already configured with their own firmware etc. * Implement a wifi scanner * Screensaver & screen blanking disabled * Automatic network check: if disconnected, reboot network subsystem, checking every 2 minutes. * VPN access / mosh / screen * VNC access under VPN :) * Chromium installed * ansible and recipes to mod every rasp in the network * USB wifi dongles configured without the FUCKING POWERSAVING MODE. == IDEAS == * underclock sistema? non necessario al momento, non serve a un cazzo- * VPN gestita interamente dai nostri server (zaverio.com) (voyanet cmq e' affidabile ed io sono root su una macchina apposita, quindi non so quanto questo sia necessario) * Mplayer accelerato per rasp pi: fare check su quei 2 link che sono spariti * Test su programma in PYTHON per controllare OMXPlayer, che PARE usi addirittura OSC per fare solo POCHE cose. * Check telecamerina del raspberry e test di streaming audio/video |
Line 58: | Line 55: |
h2. ACCESSO allo schedino Si entra con utenza pi, pw vivabasaglia. la pw root e' la nostra solita. Il sistema parte, e lancia /home/pi/shells/start.sh - da li parte tutto quel che serve, impostazioni e programmi. h2. RETE sul posto Il router e' via wireless su 10.0.0.1 ed il suo dhcp assegna indirizzi sulla classe 10.0.0.1 Per accedere al router: admin/nostrapwsolita telecom merda ha indirizzi 192.168.1.1 router, il resto BOH. PARE che su eth0 ci sia un dhcp che da 192.168.1.200 Noi assegnamo ai raspi 10.0.1.50 in poi, con eth0 fissa a 172.16.0.50 h2. Check automatico per rete su o giu' Questo script controlla ogni due minuti se la rete e' su, altrimenti restarta il networking. Viene lanciato in background con "sleep 120" perche' crontab non puo' funzionare al momento perche' il fs boot e' in Read Only (vedi sotto x dettagli). <pre> |
== ACCESSING THE SHIT == USER pi, PW vivabasaglia. Root pw is "ciaras". System boots and launch /home/pi/shells/start.sh - from there, everything starts. == Automagic check for network up/down == Every 2 minutes this piece of shit check for network and eventually put it on again. It's in background with "sleep 120" because here NO crontab due to the RO fs. {{{ |
Line 91: | Line 79: |
</pre> Questo script si chiama "*netcheck*", sta in */usr/local/sbin* e viene lanciato da */etc/rc.local* cosi: <pre> |
}}} This script is named '''netcheck''', in '''/usr/local/sbin'''and starts from '''/etc/rc.local''': {{{ # into rc.local |
Line 97: | Line 86: |
</pre> h2. Hostname con il numero dell'ultima parte dell'indirizzo IP L'ho fatto con uno script, "ultimo" che si trova in */usr/local/sbin/ultimo*, ed e' questo: <pre> |
}}} == Hostname with last IP number in it == The script is "ultimo" in '''/usr/local/sbin/ultimo''': {{{ |
Line 111: | Line 100: |
</pre> e viene lanciato dentro */etc/rc.local* con <pre> # cambia /etc/hostname in base all'ultimo numero dell'IP del wifi |
}}} and start from '''/etc/rc.local''': {{{ # change /etc/hostname adding last IP number from wifi |
Line 118: | Line 107: |
</pre> h2. VPN Ci appoggiamo a infrastruttura di uno dei nostri (Voyager) in attesa di spostare su zaverio.com. h3. Installazione VPN sui rasp <pre> |
}}} == VPN == We use Voyager's vpn :) === VPN install on rasp === {{{ |
Line 128: | Line 117: |
</pre> poi copia il file .conf gia' pronto coi certificati, 50.conf (es. per il rasp .50) Poi ti basta dare <pre> |
}}} next, copy the .conf file already prepared with all certs etc. (ex. for rasp number 50 use 50.conf) after that {{{ |
Line 136: | Line 125: |
</pre> oppure per automatizzare, copiare 50.conf su */etc/openvpn/client.conf* : e lanciarlo da */etc/rc.local* inserendovi <pre> |
}}} or copy 50.conf into '''/etc/openvpn/client.conf''' and launch from '''/etc/rc.local''' {{{ |
Line 144: | Line 133: |
</pre> h3. VPN lato macchine nostre linux, portatili, etc E' la stessa cosa solo che si usa asbesto.conf per il mio portatile e cosi' via. h2. Installazione ed uso di VNC server/client E' comodissimo a 'la teamviewer. h3. Installazione VNC lato raspberry: Vedi [[https://www.raspberrypi.org/documentation/remote-access/vnc/]] <pre> |
}}} === VPN on our computers === Same shit but using our personal certs. == VNC server/client install and usage == A teamviewer-like piece of shit, very handy! === VNC installation on raspberry === Look [[https://www.raspberrypi.org/documentation/remote-access/vnc/]] {{{ |
Line 161: | Line 150: |
</pre> poi lancia tightvncserver per configurarlo, li' dai una pw, che servira' per accedere. in *~/shells/start.sh* ho aggiunto <pre> |
}}} and launch '''tightvncserver''' to configure it, here you give a password that you will need to access. in '''~/shells/start.sh''' I added {{{ |
Line 169: | Line 158: |
</pre> h3. Installazione VPN lato macchine linux remote <pre> |
}}} === VNC installation on our computers === {{{ |
Line 175: | Line 164: |
</pre> poi basta che lanci <pre> |
}}} so just launch {{{ |
Line 181: | Line 170: |
</pre> metti la pw ed appare il desktop. FINE h2. Installazione ansible, e modo d'uso |
}}} put the pw and desktop appears. END OF SHIT == Installazione ansible, e modo d'uso == |
Line 190: | Line 178: |
h3. Ricetta ansible per configurare i vari raspberry: Si trova in /home/pi/pi.yml *ATTENZIONE: GLI SPAZI SONO PARTE DELLA SINTASSI, SE CAMBI L'INDENTAZIONE, NON FUNZIONA PIU UN CAZZO. IL LINGUAGGIO YAML E' UNA MERDA.* <pre> |
=== Ansible recipe to configure all raspberry === that's is /home/pi/pi.yml '''WARNING, SPACES ARE PART OF THE SYNTAX. IF YOU MOVE THEM, NOTHING WILL WORK. YAML IS A FUCKING PIECE OF SHIT.''' {{{ |
Line 228: | Line 216: |
</pre> *ATTENZIONE: GLI SPAZI SONO PARTE DELLA SINTASSI, SE CAMBI L'INDENTAZIONE, NON FUNZIONA PIU UN CAZZO. IL LINGUAGGIO YAML E' UNA MERDA.* si lancia con: <pre> |
}}} '''WARNING, SPACES ARE PART OF THE SYNTAX. IF YOU MOVE THEM, NOTHING WILL WORK. YAML IS A FUCKING PIECE OF SHIT.''' LAUNCH with: {{{ |
Line 236: | Line 224: |
</pre> Se vuoi lanciarla per un singolo ip, ad es. il 10.0.1.77, dai <pre> |
}}} For a single ip, ex. il 10.0.1.77, use {{{ |
Line 242: | Line 230: |
</pre> Ovviamente gli IP vanno configurati in */etc/ansible/hosts*, come segue: <pre> |
}}} IP must be configured into '''/etc/ansible/hosts''', as follow: {{{ |
Line 262: | Line 250: |
</pre> h2. Impostazione del disco Creo la schedina come fosse da 4 giga. anche se sta su una 32gb. per copiare il sistema quindi: <pre> |
}}} == Disk settings == I made the sdcard as a 4GB one, also if is 32gb. To copy it: {{{ |
Line 271: | Line 259: |
</pre> ora e' cosi: <pre> |
}}} Now it is as follow: {{{ |
Line 319: | Line 307: |
</pre> h2. ACCESSI E RETE: Ethernet: eth0, 172.16.0.50 fisso. Login: user pi, pw vivabasaglia. sudo diventa root. pw root: la solita nostra Wifi: wlan0 10.0.1.50 in poi, gw 10.0.0.1 h3. ATTENZIONE: *in /etc/network/interfaces VA SETTATO UN SOLO GW, altrimenti non so perche' ma la seconda rete (wlan0) non sale!* VEDI PIU IN BASSO h2. Rendere la distro Raspbian compatibile arm 7 -> arm 8 <pre> |
}}} Using gparted you can resize it as you need. == ACCESS / NETWORK == Ethernet: eth0, 172.16.0.50 fixed. Login: user pi, pw vivabasaglia. sudo give root. pw root: ciaras Wifi: wlan0 10.0.1.50 and up, gw 10.0.0.1 === WARNING === '''in /etc/network/interfaces SET JUST ONE GW, OTHERWHISE 2nd network card (wlan0) won't start!''' LOOK BELOW. == Make our distro compatible for arm 7 -> arm 8 == {{{ |
Line 346: | Line 334: |
</pre> e riavviare! h2. Come avere lo SCHERMO NERO AL BOOT ed evitare messaggi e fragoline Se vuoi farlo devi EDITARE */boot/cmdline.txt* -Via il boot log: si fa mettendo come console |
}}} and reboot. == BLACK SCREEN AT BOOT AVOIDING messages and logos == Edit '''/boot/cmdline.txt''' boot log: {{{ |
Line 357: | Line 346: |
al posto di tty1- _NO: meglio avere dei log per capire se sta salendo o no. ho lasciato solo loglevel=3 e logo.nologo_ Via i loghini: si fa aggiungendo alla fine della riga |
}}} instead of tty1 ''NO: better have logs to understand if it's booting or not. I left only loglevel=3 & logo.nologo'' Fuck the logo: add at the end |
Line 366: | Line 356: |
al momento quel file e' cosi: <pre> |
{{attachment:wtf.jpg}} Actually /boot/cmdline.txt is like that: {{{ |
Line 370: | Line 362: |
</pre> h2. lxde startup e quanto sono FIGLI DI PUTTANA Sti COGLIONI di raspbian hanno cambiato LXDE in LXDE-pi dentro ~/.config/lxsession cosi' l'autostart non va piu. *COGLIONI* |
}}} == lxde startup and HOW THEY'RE SON OF BITCHES == THOSE RASPBIAN BASTARDS CHANGED LXDE in LXDE-pi INTO ~/.config/lxsession so autostart didn't worked. '''ASSHOLES''' |
Line 381: | Line 373: |
E' da li dentro che lancio *~/shells/start.sh* ;) h2. WIFI dongle: |
It's from there that I launch '''~/shells/start.sh''' ;) == WIFI dongle == |
Line 387: | Line 379: |
Da qui scarichi lo zip e dentro c'e' il fottuto firmware. il .bin va copiato dentro */lib/firmware/rtlwifi* Poi serve il giusto drive a seconda del kernel: [[https://www.raspberrypi.org/forums/viewtopic.php?p=462982]] Nel caso del ns kernel, Linux raspami1 3.18.7-v7+ #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015 armv7l GNU/Linux il firmware giusto e' |
From here you download the zip file, inside is the fucking firmware. The .bin goes in '''/lib/firmware/rtlwifi''' Next you need the correct driver according to the kernel: [[https://www.raspberrypi.org/forums/viewtopic.php?p=462982]] For our kernel, Linux raspami1 3.18.7-v7+ #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015 armv7l GNU/Linux the correct firmware is |
Line 398: | Line 391: |
quindi da root: <pre> |
So, from root: {{{ |
Line 404: | Line 397: |
</pre> e riavvia! _Vecchi appunti:_ -wget https://dl.dropboxusercontent.com/u/80256631/8188eu-20140307.tar.gz //make sure you use the correct dropbox url for your Raspberry version |
}}} and reboot! == Old notes == {{{ wget https://dl.dropboxusercontent.com/u/80256631/8188eu-20140307.tar.gz //make sure you use the correct dropbox url for your Raspberry version |
Line 417: | Line 411: |
- h2. Scanner reti wifi E' utile per capire quanto copriamo come zona, e se il raspi ci arriva. * [[http://www.oak-wood.co.uk/oss/pifimon]] Pifimon. comodo, in perl, serve installare libterm-readkey-perl con apt-get. poi starra e lancia, funziona, fine. * scriptino in */home/pi/shells/wifimon.sh* fatto da me al volo ;) h2. Togliere lo SFONDO A LXDE e mettere sfondo nero. Va tolto dal background, che poi va impostato come colore nero, lo fai da X. Poi, dalle opzioni desktop, leva l'icona trash, e cosi ora devi solo levare di mezzo il panel, killandolo. h1. LEVARE IL PANNELLO IN BASSO Devi killare lxpanel. Se poi ti serve, va rilanciato con lxpanel --profile LXDE-pi: lancia direttamente *~/shells/panel.sh* h2. DISABILITA OGNI BLANK SCREEN <pre> |
}}} == WIFI Scanner == * [[http://www.oak-wood.co.uk/oss/pifimon]] Pifimon. In perl, need libterm-readkey-perl (apt-get). untar, launch, it work. * Script in '''/home/pi/shells/wifimon.sh''' ;) == Get rid of LXDE background, putting a black background == Remove from background, and put it black. You do it from X. After that, from desktop options, remove trash icon, so now you have to just kill the panel. == Killing the panel == Kill lxpanel. If you need it again, relaunch with '''lxpanel --profile LXDE-pi''' : launch directly '''~/shells/panel.sh''' == BLANK SCREEN disabling == {{{ |
Line 441: | Line 432: |
</pre> messo in *~/shells/start.sh* h2. Risolvere SSH LENTO (risolto) _One workaround is to edit /etc/sshd_config on the sshd server machine, not your ssh client machine to set "UseDNS" to "no". (From the way you originally wrote your question, it sounded like you may have edited that file on your client, which wouldn't make a difference.) |
}}} it's into '''~/shells/start.sh''' == solve SLOW SSH == One workaround is to edit /etc/sshd_config on the sshd server machine, not your ssh client machine to set "UseDNS" to "no". (From the way you originally wrote your question, it sounded like you may have edited that file on your client, which wouldn't make a difference.) |
Line 453: | Line 444: |
Sergio Corpettini come ti era gia' stato detto, sul server metti nel config di ssh UseDNS no_ h2. NASCONDERE IL CURSORE SOTTO X dopo alcuni secondi che sta fermo <pre> |
Set into ssh config: '''UseDNS no''' == HIDE X cursor after some seconds of inactivity == {{{ |
Line 461: | Line 452: |
</pre> h2. CONNESSIONE AUTOMATICA WIFI Scheda supportata: |
}}} == Automagic wifi connection == Our wifi: |
Line 469: | Line 461: |
IDEAL this DICK!!! |
|
Line 473: | Line 467: |
h3. ATTENZIONE: VIA DAL CAZZO IL POWER SAVING SUI PENNINI WIFI, CHE RENDE LA CONNESSIONE INSTABILE!!! Dando "lsmod" si vede che abbiamo il driver |
=== GET RID OF POWERSAVING on wifi dongles!!! === With "lsmod" we see we have this driver: {{{ |
Line 478: | Line 473: |
Devi creare il file */etc/modprobe.d/8192cu.conf* contenente: <pre> # Disable power saving |
}}} Create '''/etc/modprobe.d/8192cu.conf''' with: {{{ # Disable power saving, FFS! |
Line 484: | Line 480: |
</pre> e successivamente riavviare. h3. Configurazione di rete: Mettere solo questo in */etc/network/interfaces* <pre> |
}}} and reboot / reload driver. === Network configuration === Put this in '''etc/network/interfaces''' {{{ |
Line 520: | Line 515: |
</pre> e cancella */etc/wpa_supplicant/wpa_supplicant.conf* h2. SLIDESHOW <pre> |
}}} and REMOVE '''/etc/wpa_supplicant/wpa_supplicant.conf''' == SLIDESHOW == {{{ |
Line 530: | Line 525: |
</pre> -D delay, -F fullscreen. NON supporta le GIF h2. Problema ipotetico documentato su web: un FLASH puo' resettare il raspberry PI 2. E non i precedenti. Il problema e' il chip U16 che sembra fotosensibile. Dovrebbe bastare coprirlo. |
}}} -D delay, -F fullscreen. GIF not supported! == LIGHT problem in raspberry PI 2 == U16 is sensible to light. Cover it!. |
Line 540: | Line 535: |
h2. /home separata /home e' separata dal sistema in una partizione a parte. h2. Sistema in READ ONLY? BELLO sarebbe... SE FUNZIONASSE. Solo /boot al momento si puo' mettere in read only, /tmp e' su tmpfs in ram, con dentro alcuni link di /var. Questo significa che crontab e' volatile e non resta memorizzato perche' sta su ram. _FORSE ha senso mettere i link di crontab su /boot in modo che resti un crontab con delle cose immutabili, ma modificabili rendendo scrivibile /boot quando serve. DA PROVARE_ [[http://k3a.me/how-to-make-raspberrypi-truly-read-only-reliable-and-trouble-free/]] [[https://www.raspberrypi.org/forums/viewtopic.php?p=213440]] [[http://blog.pi3g.com/2014/04/make-raspbian-system-read-only/]] sembra il sistema migliore! provare h2. USCITA HDMI sempre attiva Va settata, altrimenti se il tv si accende dopo il rasp, automaticamente quest'ultimo switcha sul connettore video out. |
== Sistema in READ ONLY? == NICE TO DO. Only /boot for now is read only, /tmp is in tmpfs ramdisk, with some /var links. So crontab is volatile. MAYBE we can put crontab symlinks on /boot so we can have a fixed crontab to be modified into /boot. * [[http://k3a.me/how-to-make-raspberrypi-truly-read-only-reliable-and-trouble-free/]] * [[https://www.raspberrypi.org/forums/viewtopic.php?p=213440]] * [[http://blog.pi3g.com/2014/04/make-raspbian-system-read-only/]] sembra il sistema migliore! provare == HDMI port always ON == WE NEED THIS Because if we don't have hdmi active, the raspberry switches itself on the crappy video out connector. |
Line 562: | Line 553: |
<pre> | {{{ |
Line 565: | Line 556: |
</pre> h2. DUPLICAZIONE DELLE SCHEDINE L'immagine e' milano2.img * Metti la schedina * sudo dd if=milano2.img of=/dev/sdb bs=4096 * togli e rimetti la schedina * sudo gparted /dev/sdb * espandi la partizione /home al massimo * esci da gparted * sudo joe /mountpoint/schedina/etc/network/interfaces e cambia l'ip della WLAN, NON TOCCARE eth0 ne' nient'altro. * sync, umount h1. LINK VARI [[http://www.element14.com/community/thread/40489/l/new-raspberry-pi-b-wont-boot?displayFullThread=true]] [[http://thepihut.com/blogs/raspberry-pi-tutorials/16982376-upd4t1ng-raspbian-on-your-microsd-for-the-raspberry-pi-2]] porcodio [[http://raspberrypi.stackexchange.com/questions/7978/how-can-i-prevent-my-pis-sd-card-from-getting-corrupted-so-often]] [[https://github.com/raspberrypi/firmware/issues/397]] |
}}} == SDCARD duplication == image is milano2.img * Insert sdcard into the pc * sudo dd if=milano2.img of=/dev/sdb bs=4096 * eject / reinsert it * sudo gparted /dev/sdb * expand /home partition to the maximum * exit from gparted * sudo joe /mountpoint/schedina/etc/network/interfaces and CHANGE WLAN IP WITOUTH CHANGING EVERYTHING ELSE. * sync, umount == Some links == * [[http://www.element14.com/community/thread/40489/l/new-raspberry-pi-b-wont-boot?displayFullThread=true]] * [[http://thepihut.com/blogs/raspberry-pi-tutorials/16982376-upd4t1ng-raspbian-on-your-microsd-for-the-raspberry-pi-2]] porcodio * [[http://raspberrypi.stackexchange.com/questions/7978/how-can-i-prevent-my-pis-sd-card-from-getting-corrupted-so-often]] * [[https://github.com/raspberrypi/firmware/issues/397]] |
Line 592: | Line 581: |
~~~~ CategoryMuseo |
Raspberry setup by Asbesto
A solid setup for a raspberry sending videos / slideshow, can be rebooted / accessed by remote vpn, and make coffee.
This is for Rasp PI 3, quad core.
Howto about video / slideshow
- .mp4 files goes ONLY INTO /home/pi/video
- Pictures goes ONLY INTO /home/pi/foto
A script generate the video list to go on play, reading that dir /home/pi/video and creating a new list every X minutes or at every reboot.
so every added video will be added to the playlist.
To play only a particular video you must remove all others.
TODO ASBESTO, notepad
* ffprobe doesn't exist because DEBIAN SHIT, it was named avprobe. so dur.sh didn't worked. so listamp4.sh didn't generate any list. PORCODIO! changing ffprobe in avprobe inside dur.sh fixed everything.
Features
- Based on Raspbian
- All standard repo's
Disk image ready with everything, <3GB
- READ ONLY boot partition to avoid shit on the FS in case of brutal poweroff. But so, crontab doesn't work, "at" also maybe not. TO BE CHECKED
- Simple network config in /etc/network/interface. Nothing else needed.
- Very simple startup bash script that launch everything. Other scripts in /home/pi/shells/
- Network config via ETH0 o WLAN0, cable o wifi.
- Automatic hostname as "raspamiXX" where XX = last number of the wlan0 IP address (same can be done with eth0)
- USB wifi dongles already configured with their own firmware etc.
- Implement a wifi scanner
Screensaver & screen blanking disabled
- Automatic network check: if disconnected, reboot network subsystem, checking every 2 minutes.
- VPN access / mosh / screen
VNC access under VPN
- Chromium installed
- ansible and recipes to mod every rasp in the network
- USB wifi dongles configured without the FUCKING POWERSAVING MODE.
IDEAS
- underclock sistema? non necessario al momento, non serve a un cazzo-
- VPN gestita interamente dai nostri server (zaverio.com) (voyanet cmq e' affidabile ed io sono root su una macchina apposita, quindi non so quanto
questo sia necessario)
- Mplayer accelerato per rasp pi: fare check su quei 2 link che sono spariti
- Test su programma in PYTHON per controllare OMXPlayer, che PARE usi addirittura OSC per fare solo POCHE cose.
- Check telecamerina del raspberry e test di streaming audio/video
ACCESSING THE SHIT
USER pi, PW vivabasaglia. Root pw is "ciaras".
System boots and launch /home/pi/shells/start.sh - from there, everything starts.
Automagic check for network up/down
Every 2 minutes this piece of shit check for network and eventually put it on again.
It's in background with "sleep 120" because here NO crontab due to the RO fs.
while (true); do x=`ping -c2 google.com 2>&1 | grep unknown` if [ ! "$x" = "" ]; then echo `date` >> /home/pi/netcheck.log echo "Line is down. restarting..." >> /home/pi/netcheck.log service networking restart echo "done" >>/home/pi/netcheck.log fi sleep 120 done
This script is named netcheck, in /usr/local/sbinand starts from /etc/rc.local:
# into rc.local nohup /usr/local/sbin/netcheck &
Hostname with last IP number in it
The script is "ultimo" in /usr/local/sbin/ultimo:
# # in base all'ultimo numero dell'IP del wifi, crea /etc/hostname. # IP=`ifconfig wlan0 | grep addr: | sed 's/.*inet *//; s/ .*//'` cn=$(awk -F. '$0=$4' <<< $IP) echo "raspami"$cn > /etc/hostname
and start from /etc/rc.local:
# change /etc/hostname adding last IP number from wifi /usr/local/sbin/ultimo &
VPN
We use Voyager's vpn
VPN install on rasp
sudo apt-get install openvpn
next, copy the .conf file already prepared with all certs etc. (ex. for rasp number 50 use 50.conf)
after that
openvpn ./50.conf
or copy 50.conf into /etc/openvpn/client.conf
and launch from /etc/rc.local
service openvpn start
VPN on our computers
Same shit but using our personal certs.
VNC server/client install and usage
A teamviewer-like piece of shit, very handy!
VNC installation on raspberry
Look https://www.raspberrypi.org/documentation/remote-access/vnc/
sudo apt-get install tightvncserver
and launch tightvncserver to configure it, here you give a password that you will need to access.
in ~/shells/start.sh I added
vncserver :1 &
VNC installation on our computers
sudo apt-get install xtightvncviewer
so just launch
vncviewer 172.16.66.9:1
put the pw and desktop appears. END OF SHIT
Installazione ansible, e modo d'uso
*TODO - TODO - e' stato fatto ma e' da documentare.*
Ansible recipe to configure all raspberry
that's is /home/pi/pi.yml
WARNING, SPACES ARE PART OF THE SYNTAX. IF YOU MOVE THEM, NOTHING WILL WORK. YAML IS A FUCKING PIECE OF SHIT.
--- - hosts: pi remote_user: pi sudo: yes tasks: # netcheck # # files to be added # - copy: src=/usr/local/sbin/netcheck dest=/usr/local/sbin/netcheck owner=root group=staff mode=0755 - copy: src=/usr/local/sbin/ultimo dest=/usr/local/sbin/ultimo owner=root group=root mode=0755 - copy: src=/etc/modprobe.d/8192cu.conf dest=/etc/modprobe.d/8192cu.conf owner=root group=root mode=0644 - copy: src=/etc/rc.altrirasp dest=/etc/rc.local owner=root group=root mode=0755 # # Line to be added in /etc/rc.local # # - lineinfile: dest=/etc/rc.local state=absent regexp="exit 0" # - lineinfile: dest=/etc/rc.local line="nohup /usr/local/sbin/netcheck &" # - lineinfile: dest=/etc/rc.local line="exit 0" # # Stuff to install/remove # # - name: nmap installation # apt: name=nmap state=present - name: reboot command: /sbin/reboot
WARNING, SPACES ARE PART OF THE SYNTAX. IF YOU MOVE THEM, NOTHING WILL WORK. YAML IS A FUCKING PIECE OF SHIT.
LAUNCH with:
ansible-playbook --ask-pass ./pi.yml
For a single ip, ex. il 10.0.1.77, use
ansible-playbook --ask-pass -l 10.0.1.77 ./pi.yml
IP must be configured into /etc/ansible/hosts, as follow:
# This is the default ansible 'hosts' file. # # It should live in /etc/ansible/hosts # # - Comments begin with the '#' character # - Blank lines are ignored # - Groups of hosts are delimited by [header] elements # - You can enter hostnames or ip addresses # - A hostname/ip can be a member of multiple groups # Ex 1: Ungrouped hosts, specify before any group headers. [pi] 10.0.1.[51:99] ansible_ssh_user=pi # 192.168.1.249
Disk settings
I made the sdcard as a 4GB one, also if is 32gb. To copy it:
dd if=/dev/sdb of=milano2.img bs=4096 count=1048576
Now it is as follow:
pi@raspami1 ~ $ cat /etc/fstab proc /proc proc defaults 0 0 /dev/mmcblk0p1 /boot vfat defaults,ro 0 2 /dev/mmcblk0p2 / ext4 defaults,rw,noatime 0 1 /dev/mmcblk0p3 /home ext4 rw,nosuid,nodev,relatime,data=ordered 0 0 tmpfs /tmp tmpfs defaults 0 0 (parted) print all Model: SD SL32G (sd/mmc) Disk /dev/mmcblk0: 31.9GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 4194kB 62.9MB 58.7MB primary fat16 2 62.9MB 2943MB 2880MB primary ext4 3 2943MB 4277MB 1334MB primary ext4 root@raspami1:/home/pi# mount /dev/root on / type ext4 (rw,noatime,data=ordered) devtmpfs on /dev type devtmpfs (rw,relatime,size=470368k,nr_inodes=117592,mode=755) tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=94936k,mode=755) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=189860k) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) /dev/mmcblk0p1 on /boot type vfat (ro,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro) /dev/mmcblk0p3 on /home type ext4 (rw,nosuid,nodev,relatime,data=ordered) tmpfs on /tmp type tmpfs (rw,relatime) root@raspami1:/home/pi# root@raspami1:/home/pi# df -h Filesystem Size Used Avail Use% Mounted on rootfs 2.6G 2.0G 467M 82% / /dev/root 2.6G 2.0G 467M 82% / devtmpfs 460M 0 460M 0% /dev tmpfs 93M 264K 93M 1% /run tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 186M 0 186M 0% /run/shm /dev/mmcblk0p1 56M 15M 42M 26% /boot /dev/mmcblk0p3 1.2G 129M 1.1G 12% /home tmpfs 464M 12K 464M 1% /tmp
Using gparted you can resize it as you need.
ACCESS / NETWORK
Ethernet: eth0, 172.16.0.50 fixed.
Login: user pi, pw vivabasaglia. sudo give root. pw root: ciaras
Wifi: wlan0 10.0.1.50 and up, gw 10.0.0.1
WARNING
in /etc/network/interfaces SET JUST ONE GW, OTHERWHISE 2nd network card (wlan0) won't start!
LOOK BELOW.
Make our distro compatible for arm 7 -> arm 8
sudo apt-get update sudo apt-get upgrade sudo apt-get dist-upgrade sudo apt-get install raspberrypi-ui-mods sudo halt
and reboot.
BLACK SCREEN AT BOOT AVOIDING messages and logos
Edit /boot/cmdline.txt
boot log:
console=tty3
instead of tty1
NO: better have logs to understand if it's booting or not. I left only loglevel=3 & logo.nologo
Fuck the logo: add at the end
- loglevel=3 logo.nologo
Actually /boot/cmdline.txt is like that:
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait loglevel=3 logo.nologo
lxde startup and HOW THEY'RE SON OF BITCHES
THOSE RASPBIAN BASTARDS CHANGED LXDE in LXDE-pi INTO ~/.config/lxsession so autostart didn't worked.
ASSHOLES
http://www.raspberrypi-spy.co.uk/2014/05/how-to-autostart-apps-in-rasbian-lxde-desktop/
It's from there that I launch ~/shells/start.sh
WIFI dongle
https://github.com/lwfinger/rtl8188eu
From here you download the zip file, inside is the fucking firmware.
The .bin goes in /lib/firmware/rtlwifi
Next you need the correct driver according to the kernel: https://www.raspberrypi.org/forums/viewtopic.php?p=462982
For our kernel, Linux raspami1 3.18.7-v7+ #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015 armv7l GNU/Linux
the correct firmware is
3.18.7-v7+ #755, #756 - 8188eu-v7-20150212.tar.gz
So, from root:
wget https://dl.dropboxusercontent.com/u/80256631/8188eu-v7-20150212.tar.gz tar xzf 8188eu-v7-20150212.tar.gz ./install.sh
and reboot!
Old notes
wget https://dl.dropboxusercontent.com/u/80256631/8188eu-20140307.tar.gz //make sure you use the correct dropbox url for your Raspberry version tar -zxvf 8188eu-20140307.tar.gz sudo cp rtl8188eufw.bin /lib/firmware/rtlwifi //not needed anymore if your operating system is above 3.10.33+ sudo install -p -m 644 8188eu.ko /lib/modules/3.10.33+/kernel/drivers/net/wireless sudo insmod /lib/modules/3.10.33+/kernel/drivers/net/wireless/8188eu.ko sudo depmod -a sudo reboot
WIFI Scanner
http://www.oak-wood.co.uk/oss/pifimon Pifimon. In perl, need libterm-readkey-perl (apt-get). untar, launch, it work.
Script in /home/pi/shells/wifimon.sh
Get rid of LXDE background, putting a black background
Remove from background, and put it black. You do it from X. After that, from desktop options, remove trash icon, so now you have to just kill the panel.
Killing the panel
Kill lxpanel. If you need it again, relaunch with lxpanel --profile LXDE-pi : launch directly ~/shells/panel.sh
BLANK SCREEN disabling
xset -dpms xset s noblank xset s off
it's into ~/shells/start.sh
solve SLOW SSH
One workaround is to edit /etc/sshd_config on the sshd server machine, not your ssh client machine to set "UseDNS" to "no". (From the way you originally wrote your question, it sounded like you may have edited that file on your client, which wouldn't make a difference.)
Another solution would be to have your ISP (or whatever institution is responsible for your publicly-routable IP addresses) fix their reverse-DNS record for your IP address on their DNS name servers that are authoritative for the reverse-DNS records for that block of IP addresses. In other words, "make it so people can find your host name based on your IP address, and make sure the hostname they find maps back to your IP address". 7 mins · Unlike · 1
Set into ssh config: UseDNS no
HIDE X cursor after some seconds of inactivity
sudo apt-get install unclutter unclutter -display :0 -noevents -grab
Automagic wifi connection
Our wifi:
Edimax EW-7811Un 150Mbps 11n Wi-Fi USB Adapter, Nano Size Lets You Plug it and Forget it, Ideal for Raspberry Pi, Supports Windows, Mac OS, Linux
IDEAL this DICK!!!
https://www.raspberrypi.org/forums/viewtopic.php?f=31&t=7471
GET RID OF POWERSAVING on wifi dongles!!!
With "lsmod" we see we have this driver:
8192cu 528365 0
Create /etc/modprobe.d/8192cu.conf with:
# Disable power saving, FFS! options 8192cu rtw_power_mgnt=0 rtw_enusbss=1 rtw_ips_mode=1
and reboot / reload driver.
Network configuration
Put this in etc/network/interfaces
# ultima config testata, funziona, tira su tutto auto lo iface lo inet loopback up eth0 allow-hotplug iface eth0 inet static address 172.16.0.50 # ogni schedino col suo IP ovviamente netmask 255.255.0.0 # non usarlo! gateway 10.10.1.1 # nota: un solo gw per le interfacce # altrimenti non sale la rete wifi! auto wlan0 allow-hotplug iface wlan0 inet static address 10.0.1.50 netmask 255.0.0.0 broadcast 10.255.255.255 gateway 10.0.0.1 dns-nameservers 8.8.8.8 8.8.4.4 wpa-ssid KIP01 wpa-psk vivabasaglia
and REMOVE /etc/wpa_supplicant/wpa_supplicant.conf
SLIDESHOW
apt-get install feh feh --recursive --randomize --auto-zoom -D 20 -F ./slideshow/
-D delay, -F fullscreen. GIF not supported!
LIGHT problem in raspberry PI 2
U16 is sensible to light. Cover it!.
http://www.pcpro.co.uk/components/1000375/why-a-camera-flash-will-reboot-your-raspberry-pi-2
Sistema in READ ONLY?
NICE TO DO.
Only /boot for now is read only, /tmp is in tmpfs ramdisk, with some /var links. So crontab is volatile.
MAYBE we can put crontab symlinks on /boot so we can have a fixed crontab to be modified into /boot.
http://k3a.me/how-to-make-raspberrypi-truly-read-only-reliable-and-trouble-free/
http://blog.pi3g.com/2014/04/make-raspbian-system-read-only/ sembra il sistema migliore! provare
HDMI port always ON
WE NEED THIS Because if we don't have hdmi active, the raspberry switches itself on the crappy video out connector.
Add these two lines to */boot/config.txt* and reboot Raspbmc:
hdmi_force_hotplug=1 hdmi_drive=2
SDCARD duplication
image is milano2.img
- Insert sdcard into the pc
- sudo dd if=milano2.img of=/dev/sdb bs=4096
- eject / reinsert it
- sudo gparted /dev/sdb
- expand /home partition to the maximum
- exit from gparted
- sudo joe /mountpoint/schedina/etc/network/interfaces and CHANGE WLAN IP WITOUTH CHANGING EVERYTHING ELSE.
- sync, umount
Some links
Asbesto
~~~~ CategoryMuseo