Differences between revisions 1 and 28 (spanning 27 versions)
Revision 1 as of 2003-10-24 02:00:43
Size: 662
Editor: anonymous
Comment:
Revision 28 as of 2003-10-30 14:10:34
Size: 3183
Editor: anonymous
Comment:
Deletions are marked like this. Additions are marked like this.
Line 4: Line 4:
<b>How do I get my computer to boot from CD?</b> === I've downloaded the iso file and burned it to disk, but dyne:bolic doesn't load. What's up? ===

Well, the iso is an "image"; it must be burned "as" an image, not as a typical file, in order for the system to run it successfully. Many cd burner programs have a ''burn as image''/''burn as iso'' option.

Depending on your current OS, there are different options available to you.
'There is a very comprehensive and fairly short howto about burning an ISO image [http://www.e-smith.org/docs/howto/CD_burning_howto.php3 here].

An admittedly partial list of options:
----
using '''GNU/Linux''':
                -'''''K3b''''': Select menu ''Tools'', ''Write ISO Image'', ''Image to Write'' | Find and select the ISO file to burn | Wait fo calculation of MD5 checksum and control it is exact | Button ''Start''
                
                -'''''gcombust''''': Select tab ''burn'' | Check ''ISO 9660 Image'' | Button ''Choose image location'' | Find and select the ISO file to burn | Button ''Combust!''

                -'''''cdrecord''''' (commandline): type {{{ cdrecord -scanbus }}} to detect your device (i.e 0,0,0) | then type something like {{{ cdrecord dev=0,0,0 speed=8 -eject dynebolic.iso }}}
----
using '''Windows gui''':
                -'''''Nero''''': Select menu "File", "Burn image..." | Find and select the iso file to burn
                
                -'''''ISO Recorder''''': Instructions found [http://isorecorder.alexfeinman.com/isorecorder.htm here].


Where not noted, instructions may be executed with the left mouse button, single click.

=== How do I get my computer to boot from CD? ===
Line 7: Line 31:
Then you need to choose the CD as Boot-Device. With most computers you will have to enable "Boot from CD" in the BIOS. Please check your computer's instructions. Some computers will boot from CD when you keep the 'C' key pressed.
Line 9: Line 32:
Then you simply insert the [dyne:bolic] CD and reboot. You then need to choose the CD as Boot-Device. With most computers you will have to enable "Boot from CD" in the BIOS. Please check your computer's instructions. Some computers will boot from CD when you keep the 'C' key pressed.
Line 11: Line 34:
Afterwards, you simply insert the dyne:bolic CD and reboot.
Line 12: Line 36:
=== Hmmmm, can I see what's in the dyne:bolic iso file? ===
Line 13: Line 38:
== back to DynebolicFaq == Of course! If in '''Linux''', you have to mount your image on your favorite device, such as a hard disk:
Line 15: Line 40:
== back to <a href="http://www.dynebolic.org/">Dynebolic</a> home == ''mount -o loop /dir/to/dynebolic/iso/dynebolic-''version''.iso /mounting/directory''

where ''/dir/to/dynebolic/iso'' is where your iso file is saved, and ''/mounting/directory'' is where you plan to mount it. Be sure to have loopback device and ISO filesystem support enabled in kernel, in order to be able to mount an ISO filesystem.

In '''Windows''', you need to get a program that helps you browse or extract the iso file, such as WinISO, Iso commander, Undisker, Magic Iso, Ultra Iso and others, but beware that most, if not all of them, are NOT Free Software but shareware or proprietary, therefore they are sometimes limited time demos, or have capabilities crippled... (but you could always use dynebolic to download, update, and browse dynebolic!)

----
Back to DynebolicFaq
----
[http://dynebolic.org/ dyne:bolic homepage]

BurningAndBooting addresses questions related to creating a bootable cd from your downloaded Dynebolic ISO image.

I've downloaded the iso file and burned it to disk, but dyne:bolic doesn't load. What's up?

Well, the iso is an "image"; it must be burned "as" an image, not as a typical file, in order for the system to run it successfully. Many cd burner programs have a burn as image/burn as iso option.

Depending on your current OS, there are different options available to you. 'There is a very comprehensive and fairly short howto about burning an ISO image [http://www.e-smith.org/docs/howto/CD_burning_howto.php3 here].

An admittedly partial list of options:


using GNU/Linux:

  • -K3b: Select menu Tools, Write ISO Image, Image to Write | Find and select the ISO file to burn | Wait fo calculation of MD5 checksum and control it is exact | Button Start

    -gcombust: Select tab burn | Check ISO 9660 Image | Button Choose image location | Find and select the ISO file to burn | Button Combust!

    -cdrecord (commandline): type  cdrecord -scanbus  to detect your device (i.e 0,0,0) | then type something like  cdrecord dev=0,0,0 speed=8 -eject dynebolic.iso 


using Windows gui:

Where not noted, instructions may be executed with the left mouse button, single click.

How do I get my computer to boot from CD?

First of all, you need an ATAPI CD-ROM. Easier than it sounds, that's in every Standard PC Box.

You then need to choose the CD as Boot-Device. With most computers you will have to enable "Boot from CD" in the BIOS. Please check your computer's instructions. Some computers will boot from CD when you keep the 'C' key pressed.

Afterwards, you simply insert the dyne:bolic CD and reboot.

Hmmmm, can I see what's in the dyne:bolic iso file?

Of course! If in Linux, you have to mount your image on your favorite device, such as a hard disk:

mount -o loop /dir/to/dynebolic/iso/dynebolic-version.iso /mounting/directory

where /dir/to/dynebolic/iso is where your iso file is saved, and /mounting/directory is where you plan to mount it. Be sure to have loopback device and ISO filesystem support enabled in kernel, in order to be able to mount an ISO filesystem.

In Windows, you need to get a program that helps you browse or extract the iso file, such as WinISO, Iso commander, Undisker, Magic Iso, Ultra Iso and others, but beware that most, if not all of them, are NOT Free Software but shareware or proprietary, therefore they are sometimes limited time demos, or have capabilities crippled... (but you could always use dynebolic to download, update, and browse dynebolic!)


Back to DynebolicFaq


[http://dynebolic.org/ dyne:bolic homepage]

BurningAndBooting (last edited 2008-06-26 09:51:37 by anonymous)