Differences between revisions 9 and 56 (spanning 47 versions)
Revision 9 as of 2003-10-24 02:15:35
Size: 975
Editor: anonymous
Comment:
Revision 56 as of 2008-06-26 09:51:37
Size: 4442
Editor: anonymous
Comment: converted to 1.6 markup
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
BurningAndBooting addresses questions related to creating a bootable cd from your
downloaded Dynebolic ISO image.
DynebolicFaq : [[http://dynebolic.org/|dyne:bolic homepage]]
----
Line 4: Line 4:
== I've downloaded the iso file and burned it to disk, but Dynebolic doesn't load. Can't I just burn it to disk using Windoze Exploder? == === How can I burn the image (.iso file) to an empty CDROM or CDRW? ===
Line 6: Line 6:
No, the iso is an "image"; it must be burned "as" an image, not as a typical file, in order for the system
to run it successfully.  Many cd burner programs have a 'burn as image'/'burn as iso' option.
First of all, the iso is an "image"; it must be burned as an image, not as a typical file, in order for the system to run it successfully. Many cd burner programs have a ''burn as image'' or ''burn as iso'' option.
Line 9: Line 8:
== How do I get my computer to boot from CD? == Depending on your current OS, there are different options available to you.
'There is a very comprehensive and fairly short howto about burning an ISO image [[http://www.e-smith.org/docs/howto/CD_burning_howto.php3|here]].
Line 11: Line 11:
First of all, you need an ATAPI CD-ROM. Easier than it sounds, that's in every Standard PC Box.
Then you need to choose the CD as Boot-Device. With most computers you will have to enable "Boot from CD" in the BIOS. Please check your computer's instructions. Some computers will boot from CD when you keep the 'C' key pressed.
An admittedly partial list of options:
Line 14: Line 13:
Then you simply insert the [dyne:bolic] CD and reboot.  *Using '''GNU/Linux''':
                -'''''K3b''''': Select menu '''Tools''', '''Write ISO Image''', '''Image to Write''' | Find and select the ISO file to burn | Wait fo calculation of MD5 checksum and control it to be exact | Button '''Start'''
                
                -'''''gcombust''''': Select tab '''burn''' | Check '''ISO 9660 Image''' | Button '''Choose image location''' | Find and select the ISO file to burn | Button '''Combust!'''
Line 16: Line 18:
                -'''''cdrecord''''' (commandline): type {{{cdrecord -scanbus}}} to detect your device (i.e 0,0,0) | then type {{{cdrecord dev=0,0,0 speed=8 -eject dynebolic.iso}}}. You can learn more by reading the manual: {{{man cdrecord}}}
Line 17: Line 20:
back to DynebolicFaq  *Using '''Windows''':
                -'''''Nero''''': Select menu '''File''', '''Burn image...''' | Find and select the iso file to burn
                
                -'''''ISO Recorder''''': Instructions found [[http://isorecorder.alexfeinman.com/isorecorder.htm|here]].
Line 19: Line 25:
[http://www.dynebolic.org/ dynebolic] home  *Using '''Mac OS X''':
                -'''''CD Copier''''' : just insert the blank CD to be burned, the CD Copier application will start automatically asking the location of the ISO image file.
                
                -'''''Mac OS X 10.3 PANTHER''''': start '''Disk Utility''' from Applications -> Utils and then click on the menu '''Image''' and choose '''Burn...''' -> select the dynebolic ISO file and BURN!

 *Using '''Sun Solaris / Open Solaris''':
                -'''''cdrw''''' : insert a blank CD-R/W. On a Shell-Prompt type: `cdrw -i <your.iso>`.

                -'''''using JDS/R3''''' : insert a blank CD-R/W. Rightklick on the <file.iso>, write to cd.

Where not noted, instructions may be executed with the left mouse button, single click.
----
=== How do I get my computer to boot from CD? ===

First of all, you need an ATAPI CD-ROM. Easier than it sounds, that's in every standard PC Box.

You then need to choose the CD as Boot-Device. With most computers you will have to enable "Boot from CD" in the BIOS. Please check your computer's instructions. Some computers will boot from CD when you keep the 'C' key pressed.

Afterwards simply insert the dyne:bolic CD and reboot.
----
=== I'm curious (or paranoid)! Can I see what's in the dyne:bolic iso file? ===

Of course!
 * In '''GNU/Linux''', you have to mount your image on your favorite device, such as a hard disk:

 {{{mount -o loop /dir/to/dynebolic/iso/dynebolic-}}}version{{{.iso /mounting/directory}}}

 where ''/dir/to/dynebolic/iso'' is where your iso file is saved, and ''/mounting/directory'' is where you plan to mount it. Be sure to have loopback device and ISO filesystem support enabled in kernel, in order to be able to mount an ISO filesystem.

 * In '''Windows''', you need to get a program that helps you browse or extract the iso file, such as WinISO, Iso commander, Undisker, Magic Iso, Ultra Iso and others, but beware that most, if not all of them, are NOT Free Software but shareware or proprietary, therefore they are sometimes limited time demos, or have capabilities crippled... (but you could always use dynebolic to download, update, and browse dynebolic!)

 An option for '''Windows Users''' is [[http://www.daemon-tools.cc/dtcc/download.php|Daemon Tools]]. These are freeware for non-commercial use.

 * In '''MacOSX''' you can simply click on the ISO file and it will be mounted in a directory of your desktop.

If you have just a browser and still want to peek inside the dynebolic ISO file contents, then you can browse [[http://www.mirror.ac.uk/sites/www.dynebolic.org/|this web page]] kindly offered by the UK Mirror Service, which lets you
navigate the contents thru a web interface.

----
DynebolicFaq : [[http://dynebolic.org/|dyne:bolic homepage]]
----

DynebolicFaq : dyne:bolic homepage


How can I burn the image (.iso file) to an empty CDROM or CDRW?

First of all, the iso is an "image"; it must be burned as an image, not as a typical file, in order for the system to run it successfully. Many cd burner programs have a burn as image or burn as iso option.

Depending on your current OS, there are different options available to you. 'There is a very comprehensive and fairly short howto about burning an ISO image here.

An admittedly partial list of options:

  • Using GNU/Linux:

    • -K3b: Select menu Tools, Write ISO Image, Image to Write | Find and select the ISO file to burn | Wait fo calculation of MD5 checksum and control it to be exact | Button Start

      -gcombust: Select tab burn | Check ISO 9660 Image | Button Choose image location | Find and select the ISO file to burn | Button Combust!

      -cdrecord (commandline): type cdrecord -scanbus to detect your device (i.e 0,0,0) | then type cdrecord dev=0,0,0 speed=8 -eject dynebolic.iso. You can learn more by reading the manual: man cdrecord

  • Using Windows:

    • -Nero: Select menu File, Burn image... | Find and select the iso file to burn

      -ISO Recorder: Instructions found here.

  • Using Mac OS X:

    • -CD Copier : just insert the blank CD to be burned, the CD Copier application will start automatically asking the location of the ISO image file.

      -Mac OS X 10.3 PANTHER: start Disk Utility from Applications -> Utils and then click on the menu Image and choose Burn... -> select the dynebolic ISO file and BURN!

  • Using Sun Solaris / Open Solaris:

    • -cdrw : insert a blank CD-R/W. On a Shell-Prompt type: cdrw -i <your.iso>.

      -using JDS/R3 : insert a blank CD-R/W. Rightklick on the <file.iso>, write to cd.

Where not noted, instructions may be executed with the left mouse button, single click.


How do I get my computer to boot from CD?

First of all, you need an ATAPI CD-ROM. Easier than it sounds, that's in every standard PC Box.

You then need to choose the CD as Boot-Device. With most computers you will have to enable "Boot from CD" in the BIOS. Please check your computer's instructions. Some computers will boot from CD when you keep the 'C' key pressed.

Afterwards simply insert the dyne:bolic CD and reboot.


I'm curious (or paranoid)! Can I see what's in the dyne:bolic iso file?

Of course!

  • In GNU/Linux, you have to mount your image on your favorite device, such as a hard disk:

    mount -o loop /dir/to/dynebolic/iso/dynebolic-version.iso /mounting/directory

    where /dir/to/dynebolic/iso is where your iso file is saved, and /mounting/directory is where you plan to mount it. Be sure to have loopback device and ISO filesystem support enabled in kernel, in order to be able to mount an ISO filesystem.

  • In Windows, you need to get a program that helps you browse or extract the iso file, such as WinISO, Iso commander, Undisker, Magic Iso, Ultra Iso and others, but beware that most, if not all of them, are NOT Free Software but shareware or proprietary, therefore they are sometimes limited time demos, or have capabilities crippled... (but you could always use dynebolic to download, update, and browse dynebolic!)

    An option for Windows Users is Daemon Tools. These are freeware for non-commercial use.

  • In MacOSX you can simply click on the ISO file and it will be mounted in a directory of your desktop.

If you have just a browser and still want to peek inside the dynebolic ISO file contents, then you can browse this web page kindly offered by the UK Mirror Service, which lets you navigate the contents thru a web interface.


DynebolicFaq : dyne:bolic homepage


BurningAndBooting (last edited 2008-06-26 09:51:37 by anonymous)